Airtac SGCD Dual Rod Cylinder SGCD200X100S
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD200X100S is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 100mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke100 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
About the Airtac SGCD Dual Rod Cylinder SGCD200X100S
Delivering 15079 N of thrust in both directions at 0.5 MPa, this double-acting AirTAC SGCD200X100S cylinder uses a twin-rod piston to balance output perfectly. Because the rod passes through both covers, the pressure area stays identical on each face. This symmetric load path resists torsional twist and lets you mount tooling or a sensor cam on the back end. It offers a safe working load of roughly 9047 N, capable of vertically lifting about 769 kg with a 2:1 margin.
Built on a genuine ISO 15552 tie-rod frame, four steel rods clamp the aluminium barrel to the covers for high structural rigidity. The G3/4 port feeds the 40 mm rod, and the -S suffix means a built-in magnet is present for CMSG, DMSG, or EMSG switches. Adjustable 50 mm cushions absorb kinetic energy at stroke ends, while the standard TPU seals handle -20 to +70 C. For hotter environments up to 150 C, specify the Viton H seal option.
Airtac SGCD Dual Rod Cylinder SGCD200X100S Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD200X100S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | 21111 N |
| Max (@1.0 MPa) | 3204 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD200X100S
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD200X100S Is Used
Twin-Spindle Press
Drives two opposing forming tools with equal 15079 N force, using the symmetric double-rod structure to maintain parallelism without torsional twist.
Symmetric Divert Gate
Uses the rear rod extension to mount a cam for CMSG sensors while the front rod pushes the diverting flap, keeping the load path perfectly balanced.
Vertical Lift Station
Lifts approximately 769 kg of palletized goods vertically, leveraging the equal pull-side area to provide consistent force on the descent.
Is the Airtac SGCD Dual Rod Cylinder SGCD200X100S the Right Cylinder?
This 200 mm bore sits between the 160 mm option (9425 N each way) and the 250 mm model (23562 N each way), giving you 15079 N at 0.5 MPa. Choose the double-rod layout when your mechanism requires anti-rotation guidance, needs to drive two tools simultaneously, or demands a symmetric load path to prevent side-loading. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. The -S magnet enables position sensing. Even at 100 mm stroke, always guide the load externally to prevent rod binding, and note that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD200X100S FAQ
Because it is a double-rod cylinder, force is equal both ways using the rod-side area. It delivers 15079 N at 0.5 MPa and 21110 N at 0.7 MPa in both directions, with a theoretical max of 3075 kgf at 1.0 MPa. The air port size is G3/4.
No, a standard cylinder drifts when air is removed or the valve is centered. The adjustable 50 mm cushions only decelerate the piston near the end of stroke; they do not lock it. To hold a load securely, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD200X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.