Airtac SGCD Dual Rod Cylinder SGCD200X150
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD200X150 is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 150mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke150 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
About the Airtac SGCD Dual Rod Cylinder SGCD200X150
Delivering 15079 N of thrust in both directions at 0.5 MPa, this large-bore double-rod cylinder outputs equal force whether extending or retracting. The symmetric piston design pushes a 40 mm rod out of both covers, making it ideal for driving twin tooling stations or acting as a non-rotating anti-twist guide. It provides a safe working load of about 9047 N, capable of vertically lifting roughly 769 kg with a 2:1 safety margin.
Built on a genuine ISO 15552 mounting interface, it drops directly into existing large-bore fixtures via its four steel tie rods that clamp the aluminum barrel. Air enters through a G3/4 port, and adjustable 50 mm cushions protect the ends. This non-magnetic SKU cannot take a sensor; add the -S variant for CMSG/DMSG/EMSG switches. Note that cushions only decelerate the load, so fit an external rod lock for holding.
Airtac SGCD Dual Rod Cylinder SGCD200X150 Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD200X150 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | 21111 N |
| Max (@1.0 MPa) | 3204 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD200X150
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD200X150 Is Used
Twin-Spindle Press
Drives two opposing forming tools simultaneously with equal 15079 N thrust, ensuring perfectly balanced pressing without rotational twist.
Symmetric Divertor
Uses both rod ends to push and pull a diverting gate from opposite sides, keeping the load path centered and stable during high-speed sorting.
Vertical Lift Fixture
Lifts heavy pallets straight up using the top rod end while the bottom rod maintains a balanced pneumatic profile for smooth vertical motion.
Is the Airtac SGCD Dual Rod Cylinder SGCD200X150 the Right Cylinder?
Size both ways: the smaller 160 mm bore yields 9425 N each way, while the larger 250 mm bore provides 23562 N. Choose this 200 mm model when you need substantial symmetric power. A double rod is the right call for anti-rotation guidance, carrying a sensor cam on the back end, or driving two tools at once. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2. Because this SKU lacks the -S magnet, it cannot accept position switches. For any stroke at or over 500 mm, always use external guide rails to prevent side-load binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD200X150 FAQ
Force is equal both ways: 15079 N at 0.5 MPa and 21110 N at 0.7 MPa, with a theoretical max of 3075 kgf at 1.0 MPa. The air port size is G3/4.
The double-rod design provides a symmetric load path and equal push/pull areas, which prevents piston twisting and allows you to mount tooling or a sensor cam on the back end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD200X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.