Airtac SGCD Dual Rod Cylinder SGCD200X300
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD200X300 is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 300mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke300 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
About the Airtac SGCD Dual Rod Cylinder SGCD200X300
Delivering 15079 N of thrust in both directions at 0.5 MPa, this double-acting tie-rod cylinder features a piston rod exiting both covers for perfectly symmetric load paths. The equal-both-ways output makes it good for about 9047 N of real work, roughly 769 kg lifted vertically with a 2:1 safety margin. Four steel tie rods clamp the aluminum barrel to the covers, ensuring rigid large-bore construction.
It uses a G3/4 air port and a 50 mm adjustable air cushion at each end to tame end-of-stroke impacts. The genuine ISO 15552 mounting interface allows direct dimensional interchange into existing large-bore fixtures. Note this base SKU lacks a magnet, so it cannot accept CMSG/DMSG/EMSG sensors without specifying the -S variant.
Airtac SGCD Dual Rod Cylinder SGCD200X300 Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD200X300 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | 21111 N |
| Max (@1.0 MPa) | 3204 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD200X300
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD200X300 Is Used
Twin-Spindle Press
Drives two forming tools simultaneously from opposite rod ends, keeping the pressing force perfectly balanced at 15079 N each way.
Symmetric Transfer Arm
Uses the through-rod design to push and pull a transfer carriage with identical 21110 N force at 0.7 MPa without twisting.
Balanced Lift Platform
Lifts heavy jigs vertically, relying on the equal pull-side area to provide stable 769 kg lifting capacity with a 2:1 margin.
Is the Airtac SGCD Dual Rod Cylinder SGCD200X300 the Right Cylinder?
This 200 mm bore sits between the 160 mm option (9425 N each way at 0.5 MPa) and the 250 mm model (23562 N each way). Choose the double-rod layout when you need anti-rotation guidance, twin tooling driven from both ends, or a rear sensor cam. Mounting hardware includes FA, LB, TC, FTC, TCM1, and TCM2 brackets. Because the 300 mm stroke is under the 500 mm side-load threshold, external guide rails are less critical here, though heavy radial loads still require support. Remember that a plain cylinder drifts on air loss; add an external rod lock or pilot-operated check valve if you need strict load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD200X300 FAQ
Because the rod passes through both covers, force is equal both ways: 15079 N at 0.5 MPa, 21110 N at 0.7 MPa, and a theoretical max of 3075 kgf at 1.0 MPa. The air port is G3/4.
No, this specific SKU does not have a magnet. You must order the -S variant to use CMSG, DMSG, or EMSG magnetic switches for end-of-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD200X300
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.