Airtac SGCD Dual Rod Cylinder SGCD200X500
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD200X500 is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 500mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke500 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
About the Airtac SGCD Dual Rod Cylinder SGCD200X500
Delivering 15079 N of equal force in both directions at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder uses a twin-rod piston to balance your load path perfectly. Four steel tie rods clamp the aluminum barrel, and the G3/4 port handles high flow. This non-magnet SKU cannot host sensors, but adding the -S variant enables CMSG/DMSG/EMSG switches.
With a 500 mm stroke, external rod-end guidance is critical to prevent side-load bending. The adjustable 50 mm air cushions decelerate the payload, but remember they do not hold load on air loss. For secure vertical holding, pair this unit with an external rod lock or pilot-operated check valve. It yields a safe working load of roughly 9047 N, easily lifting about 769 kg vertically with a 2:1 margin.
Airtac SGCD Dual Rod Cylinder SGCD200X500 Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD200X500 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | 21111 N |
| Max (@1.0 MPa) | 3204 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD200X500
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD200X500 Is Used
Dual-Station Conveyor Divert
Drives two diverter arms simultaneously from one piston, ensuring perfectly synchronized package routing across parallel belt lines.
Anti-Rotation Press Head
Eliminates rotational twist on heavy stamping heads by guiding the load through twin rods exiting both covers.
Symmetric Pallet Lift
Balances large palletizing platforms without uneven tilting, using the equal push and pull force to raise and lower smoothly.
Is the Airtac SGCD Dual Rod Cylinder SGCD200X500 the Right Cylinder?
Sizing both ways, the smaller 160 mm bore provides 9425 N at 0.5 MPa, while the larger 250 mm bore hits 23562 N. This 200 mm bore is the sweet spot for heavy symmetric loads. Choose a double-rod design when you need anti-rotation stability, twin tooling operation, or a rear sensor cam. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2. Because this specific SKU lacks the -S magnet, it cannot accept magnetic switches. Finally, at 500 mm of stroke, you must use external guides to support the rod and prevent binding under high side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD200X500 FAQ
This double-acting double-rod cylinder generates equal force both ways: 15079 N at 0.5 MPa and 21110 N at 0.7 MPa. The theoretical maximum is 3075 kgf at 1.0 MPa. It features a 200 mm bore, 40 mm rod, G3/4 port, and 50 mm adjustable cushions.
No, this specific SKU does not include a magnet. You must select the -S variant to use CMSG, DMSG, or EMSG magnetic switches. Without the -S option, the cylinder cannot accept any internal position sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD200X500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.