Airtac SGCD Dual Rod Cylinder SGCD200X600
The AirTAC Airtac SGCD Dual Rod Cylinder SGCD200X600 is a genuine double acting, double rod ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø200mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ200 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting, double rod
- Rod threadM36×2.0
- CushionAdjustable, 50 mm
About the Airtac SGCD Dual Rod Cylinder SGCD200X600
Delivering 15079 N of equal force in both directions at 0.5 MPa, this 200 mm bore double-rod cylinder uses the rod-side piston area on every stroke. It yields a safe working load of roughly 9047 N for real work, translating to a 769 kg vertical lift with a 2:1 safety margin. The G3/4 port manages the high airflow needed for its 30-500 mm/s speed range.
Four steel tie rods clamp the aluminum barrel to the covers, providing structural rigidity under heavy loads. Because a rod exits both ends, the piston sees a symmetric load path that naturally resists torsional twist. This non-magnet SKU cannot host CMSG or DMSG sensors, and standard TPU seals handle -20 to +70 C, though a Viton H option extends heat resistance to 150 C.
Airtac SGCD Dual Rod Cylinder SGCD200X600 Technical Specifications
| Model | Airtac SGCD Dual Rod Cylinder SGCD200X600 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø200 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø200mm)
| Pressure | Force (both ways) | — |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21111 N | 21111 N |
| Max (@1.0 MPa) | 3204 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac SGCD Dual Rod Cylinder SGCD200X600
| SGCD | ISO 15552 tie-rod cylinder (double-rod type). |
|---|---|
| 200 | Bore size in mm (125 / 160 / 200 / 250). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCD Dual Rod Cylinder SGCD200X600 Is Used
Dual-End Transfer Pusher
Drives two parallel conveyor lanes simultaneously using the rods exiting both covers, ensuring perfectly synchronized part transfer over the 600 mm travel.
Balanced Lift Platform
Lifts heavy jigs with equal push and pull force, using the symmetric load path to prevent platform twisting during vertical actuation.
Anti-Rotation Forming Press
Holds tight machining tolerances on a 200 mm bore by resisting torsional deflection, relying on the twin rods for strict linear guidance.
Is the Airtac SGCD Dual Rod Cylinder SGCD200X600 the Right Cylinder?
Sizing symmetrically, the smaller 160 mm bore provides 9425 N each way, while the massive 250 mm bore offers 23562 N. This 200 mm model sits in the sweet spot for heavy-duty equal-force tasks. Choose a double-rod design when you need anti-rotation guidance, twin tooling driven from both ends, or a rear rod to act as a sensor cam. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2. Because this is a 600 mm stroke, you must use external guides to prevent rod bending under side loads. Note that this specific SKU lacks the -S magnet and cannot support switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCD Dual Rod Cylinder SGCD200X600 FAQ
The force is equal in both directions at 15079 N at 0.5 MPa and 21110 N at 0.7 MPa, with a theoretical max of 3075 kgf at 1.0 MPa. It uses a G3/4 air port.
No, the air cushion only decelerates near stroke end and will not hold a load on air loss; use an external rod lock or pilot-operated check valve. Also, this SKU lacks the -S magnet, so it cannot take CMSG or DMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCD Dual Rod Cylinder SGCD200X600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.