Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S
The AirTAC Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 125mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke125 mm
- Port sizeG1/2
- Acting typeDouble acting, adjustable stroke
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
About the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S
Delivering 6136 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder uses four steel rods to clamp its aluminum barrel for high structural rigidity. It handles a safe working load of about 3682 N, which translates to lifting roughly 313 kg vertically with a 2:1 margin. The bore dictates a G1/2 port, a 32 mm rod, and 40 mm adjustable air cushions at each end.
The -100 code means an external adjuster can shorten the extend stroke on-site by up to 100 mm, yielding a usable extend range of 25-125 mm without changing the cylinder itself. Because this SKU includes the -S magnet, it supports CMSG, DMSG, and EMSG sensors for position detection. The retract end remains fixed, and the standard TPU seals offer long life across -20 to +70 C, with a Viton H option for 0-150 C heat.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S Technical Specifications
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 125 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S Is Used
Press Stroke Tuning
Dial in the exact 25-125 mm extend contact point on a light-duty assembly press without swapping the entire cylinder body.
Variable Transfer Stops
Adjust the extend length on a diverter gate to handle different package sizes on the same production line.
Lift Station Spares
Keep one cylinder as a universal spare for multiple 125 mm bore lifts, shortening the stroke on-site to match the original.
Is the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S the Right Cylinder?
When sizing this unit, stepping down is not an option as 125 mm is the smallest SGCJ bore, delivering 6136 N push at 0.5 MPa. Stepping up to the 160 mm bore increases that thrust to 10053 N if your fixture needs more power. The adjustable stroke is ideal for sharing one spare cylinder across multiple stroke variants or fine-tuning the end position on-site. You can mount it via FA, LB, TC, FTC, TCM1, or TCM2 brackets. The built-in -S magnet allows CMSG, DMSG, and EMSG switches to track piston travel. For any stroke at or above 500 mm, always use external guide rails to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S FAQ
At 0.5 MPa it provides 6136 N push and 5734 N pull. At 0.7 MPa it provides 8590 N push and 8028 N pull. The theoretical maximum force is 1251 kgf at 1.0 MPa. The air port is G1/2.
The nominal 125 mm stroke is the maximum. The external stop screw lets you shorten the extend stroke by up to 100 mm on-site, giving a usable extend range of 25-125 mm. The retract end is fixed, and this stop only sets the end position, not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.