Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50
The AirTAC Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50 is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 125mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke125 mm
- Port sizeG1/2
- Acting typeDouble acting, adjustable stroke
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
About the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50
Delivering 6136 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder uses four steel rods to clamp its aluminum barrel for high rigidity. The G1/2 port feeds a 32 mm rod, and the two-way piston seal ensures reliable double-acting single-rod operation.
An external adjuster lets you shorten the extend stroke on-site by up to 50 mm, meaning usable extend travel is 75-125 mm while the retract end stays fixed. This on-site tuning is ideal for sharing spares across stroke variants. It handles a safe working load of about 3682 N, lifting roughly 313 kg vertically with a 2:1 margin. Standard TPU seals operate from -20 to +70 C, with a Viton H option extending heat resistance to 150 C.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50 Technical Specifications
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 125 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50 Is Used
Press Tonnage Trimming
Dial in the exact 75-125 mm extend contact point on-site to accommodate different material thicknesses without swapping the entire actuator.
Divertor Gate Adjustment
Fine-tune the extend stop by up to 50 mm to alter package routing angles precisely on-site while maintaining 6136 N of pushing force.
Pallet Stop Positioning
Shorten the extend stroke from the maximum 125 mm to adapt to varying pallet depths, ensuring robust 8590 N stopping power at 0.7 MPa.
Is the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50 the Right Cylinder?
Size this 125 mm bore against the 160 mm option, which jumps to 10053 N push at 0.5 MPa, or drop down if lower force suffices. The adjustable stroke shines when you need fine end-position tuning without remounting hardware. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. Because this SKU lacks the -S suffix, it cannot accept CMSG or DMSG sensors; add -S for magnetic switching. For any stroke over 500 mm, always use a guide rail to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50 FAQ
At 0.5 MPa it provides 6136 N push and 5734 N pull. At 0.7 MPa it yields 8590 N push and 8028 N pull. The theoretical maximum is 1251 kgf at 1.0 MPa. It features a G1/2 air port and a 32 mm piston rod with an M27x2.0 thread.
The nominal 125 mm stroke is the maximum travel. An external adjuster lets you shorten the extend stroke by up to 50 mm on-site, giving a usable extend range of 75-125 mm. The retract end remains fixed. This mechanism sets the end position and does not lock the load; use an external rod lock or pilot-operated check valve to hold loads securely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X125-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.