Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S
The AirTAC Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 160mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke160 mm
- Port sizeG1/2
- Acting typeDouble acting, adjustable stroke
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
About the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S
Delivering 6136 N of push force at 0.5 MPa, this ISO 15552 tie-rod cylinder brings large-bore power to precision tasks. The four steel tie rods clamp the aluminum barrel securely, while the G1/2 port supplies air to the 32 mm rod. It handles a safe working load of about 3682 N, which means you can vertically lift roughly 313 kg with a 2:1 safety margin.
The -10 code means an external adjuster can shorten the extend stroke on-site by up to 10 mm, giving a usable range of 150 to 160 mm without changing the mount. Because it carries the -S suffix, a built-in piston magnet is ready for CMSG, DMSG, or EMSG position switches. The retract end remains fixed, and the standard TPU seals offer long life across -20 to +70 C.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S Technical Specifications
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S Is Used
Press Fit Tuning
Fine-tune the 10 mm extend window on-site to dial in the exact bottoming force for pressing bearings without remounting the cylinder.
Divertor Stop Adjustment
Adjust the end position by a few millimeters to accommodate different package sizes on a shared conveyor line using the G1/2 port.
Pallet Lift Stop
Lift loads up to 313 kg vertically with a 2:1 margin, using the external stop screw to set precise lift heights for various pallet stacks.
Is the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S the Right Cylinder?
When sizing this 125 mm bore against its neighbors, note it sits at the low edge of the large-bore family, offering 6136 N push at 0.5 MPa compared to 10053 N on the 160 mm bore. The adjustable stroke is ideal for sharing a spare cylinder across slightly different stroke variants or fine-tuning the end position on-site. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. The -S magnet supports CMSG/DMSG/EMSG sensors. For any stroke at or above 500 mm, always use a guide rail to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S FAQ
At 0.5 MPa it provides 6136 N push and 5734 N pull. At 0.7 MPa it provides 8590 N push and 8028 N pull. The theoretical maximum is 1251 kgf at 1.0 MPa. The air port is G1/2.
The 160 mm nominal stroke is the maximum. An external adjuster lets you shorten the extend stroke by up to 10 mm on-site, yielding a usable extend range of 150 to 160 mm. The retract end is fixed. This stop sets the end position but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X160-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.