Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S
The AirTAC Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting, adjustable stroke
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
About the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S
Delivering 6136 N of push force at 0.5 MPa, this large-bore ISO 15552 tie-rod cylinder features a 125 mm bore and a G1/2 air port. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, and the genuine ISO 15552 mounting interface drops directly into existing large-bore fixtures. Because this is an SGCJ variant, an external adjuster lets you shorten the extend stroke on-site by up to 40 mm, meaning your usable extend range is 135 to 175 mm while the retract end remains fixed.
The built-in piston magnet supports CMSG, DMSG, and EMSG switches for precise position sensing. In practical terms, it handles a safe working load of about 3682 N, which translates to lifting roughly 313 kg vertically with a 2:1 safety margin. Standard TPU seals provide long life across -20 to +70 C, though a Viton H option extends that range to 0-150 C for high-heat environments.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S Technical Specifications
| Model | Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 175 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S Is Used
Press Fit Tuning
Use the 40 mm extend window to micro-adjust the bottoming force and depth of a press fit operation without changing the fixture height.
Variable Stop Diverter
Adjust the extend stroke on the fly to act as a movable stop for different package lengths arriving on a sorting line.
Vertical Lift Dampening
Lift loads up to 313 kg vertically and fine-tune the upper end position to accommodate varying pallet stack heights.
Is the Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S the Right Cylinder?
When sizing this unit, the neighboring 160 mm bore steps up significantly to 10053 N of push force at 0.5 MPa, while dropping below 125 mm pushes you out of the large-bore tier. The adjustable stroke is a major advantage if you need to fine-tune end positions on-site without swapping the cylinder, or if you want a shared spare across multiple stroke variants. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. The included -S magnet enables sensor use right away. Even at this 175 mm stroke, always verify your guide structure to prevent excessive side loading on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S FAQ
At 0.5 MPa it provides 6136 N push and 5734 N pull. At 0.7 MPa it provides 8590 N push and 8028 N pull. The theoretical maximum force is 1251 kgf at 1.0 MPa. The air port is G1/2.
The nominal 175 mm stroke is the maximum. The external stop screw lets you shorten the extend stroke on-site by up to 40 mm, giving a usable extend range of 135 to 175 mm. The retract end is fixed, and the stop only sets the end position—it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ125~160 Adjustable Cylinder SGCJ125X175-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.