Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S
The AirTAC Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 500mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ250 mm
- Stroke500 mm
- Port sizeG1
- Acting typeDouble acting, adjustable stroke
- Rod threadM42×2.0
- CushionAdjustable, 60 mm
About the Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S
Generating massive thrust, this large-bore ISO 15552 tie-rod cylinder delivers 24543 N of push force at 0.5 MPa. The four steel tie rods clamp the aluminum barrel to the covers, providing structural rigidity for heavy-duty automation. It features a G1 air port, a 50 mm piston rod, and adjustable 60 mm air cushions at both ends.
The -10 code defines an external adjuster that lets you shorten the extend stroke on-site by up to 10 mm, giving a usable range of 490-500 mm without changing the cylinder itself. This SKU includes a built-in piston magnet for CMSG, DMSG, or EMSG switches. With a safe working load around 14726 N, it can vertically lift roughly 1251 kg with a 2:1 margin. Note that TPU seals are unavailable for this 250 mm bore; NBR is standard, with a Viton H option for 0-150 C environments.
Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S Technical Specifications
| Model | Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 500 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø250mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 24544 N | 23562 N |
| 0.7 MPa | 34361 N | — |
| Max (@1.0 MPa) | 5006 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S Is Used
Heavy Pallet Lifts
Raises loaded pallets in automated distribution hubs, using the 10 mm adjuster to dial in the exact transfer height.
Press Ejection
Ejects heavy formed parts from large presses, relying on the 60 mm cushions to decelerate the massive 50 mm rod smoothly.
Automated Storage
Actuates multi-ton shelving units in climate-controlled warehouses, benefiting from the Viton H high-temperature seal option.
Is the Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S the Right Cylinder?
Sizing this actuator requires looking both ways: the 200 mm bore tops out at 15708 N push at 0.5 MPa, while this 250 mm bore reaches 24543 N, defining the high edge of the family. The 10 mm adjustable window is perfect for fine-tuning end positions on-site or sharing a spare across stroke variants. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. The -S suffix means the magnet is present and ready for sensors. Because the stroke is 500 mm, you must use external guides to prevent rod bending under side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S FAQ
At 0.5 MPa it provides 24543 N push and 23562 N pull. At 0.7 MPa it provides 34360 N push and 32986 N pull. The theoretical maximum is 5006 kgf at 1.0 MPa. The air port is G1.
The nominal 500 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 10 mm, yielding a 490-500 mm usable range. The retract end remains fixed. This mechanism sets end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.