Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40
The AirTAC Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40 is a genuine double acting, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 700mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ250 mm
- Stroke700 mm
- Port sizeG1
- Acting typeDouble acting, adjustable stroke
- Rod threadM42×2.0
- CushionAdjustable, 60 mm
About the Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40
Delivering massive thrust for heavy industry, this large-bore ISO 15552 tie-rod cylinder pushes with 24543 N and pulls with 23562 N at 0.5 MPa. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity. It handles a safe working load of about 14726 N, which translates to lifting roughly 1251 kg vertically with a 2:1 safety margin. The G1 air port matches the 250 mm bore size.
The -40 code means an external adjuster can shorten the extend stroke on site by up to 40 mm, giving a usable range of 660 to 700 mm without changing the cylinder itself. This lets you fine-tune the end position precisely. The retract end remains fixed. For high-heat environments up to 150 C, specify the Viton H seal option, as standard TPU is not available on this 250 mm bore. Note this SKU lacks a magnet and cannot take a sensor.
Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40 Technical Specifications
| Model | Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 700 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø250mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 24544 N | 23562 N |
| 0.7 MPa | 34361 N | — |
| Max (@1.0 MPa) | 5006 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40 Is Used
Heavy Press Clamping
Use the 660 to 700 mm extend window to dial in the exact clamping depth on large press assemblies, leveraging 24543 N of thrust at 0.5 MPa.
Pallet Positioning Stop
Fine-tune the stopping end position for oversized pallets on a conveyor without physically remounting the cylinder or changing the fixed retract end.
Large Door Actuation
Adjust the external stop screw to set the precise open angle of heavy industrial doors, ensuring a perfect seal without mechanical interference.
Is the Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40 the Right Cylinder?
When sizing this 250 mm bore, stepping down to a 200 mm bore drops the 0.5 MPa push force to 15708 N, while this unit provides 24543 N. As the largest standard bore, it sits at the top edge of the range, yielding a theoretical maximum of 5006 kgf at 1.0 MPa. The adjustable stroke is ideal when you need shared spares across stroke variants or on-site end-position tuning. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2. Because the 700 mm stroke is long, always use external guides to prevent rod bending and manage side loads. Without the -S suffix, this cylinder cannot host CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40 FAQ
At 0.5 MPa it pushes 24543 N and pulls 23562 N. At 0.7 MPa it pushes 34360 N and pulls 32986 N. The theoretical maximum is 5006 kgf at 1.0 MPa.
The nominal 700 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on site by up to 40 mm, yielding a usable 660 to 700 mm range. The retract end is fixed. This mechanism sets end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X700-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.