This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI100X130STC, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI100 Standard Cylinder SI100X130STC
The AirTAC Airtac SI100 Standard Cylinder SI100X130STC is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø100mm bore and 130mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI100X130STC, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke130 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAI100X130STC
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI100 Standard Cylinder SI100X130STC
The AirTAC SI100X130STC is a discontinued double-acting ISO 15552 profile cylinder with a 100 mm bore and 130 mm stroke. It delivers 3927 N push force at 0.5 MPa through a G1/2 port. The direct replacement is the SAI100X130STC, which retains the same ISO 15552 mounting interface, TC trunnion, and output force.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. The SAI family also adds SAIL, SAIF, and BSAI lock variants the SI lacked. Your -S magnet works with legacy CS1-B/DS1-B sensors.
Airtac SI100 Standard Cylinder SI100X130STC Technical Specifications
| Model | Airtac SI100 Standard Cylinder SI100X130STC |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI100X130STC |
| Bore size | Ø100 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI100X130STC carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAI100X130STC produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI100 Standard Cylinder SI100X130STC
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI100 Standard Cylinder SI100X130STC Is Used
Heavy Press Clamping
Applies the 3927 N push force at 0.5 MPa to secure heavy fabrication parts during machining or welding operations.
Pallet Diverting
Uses the 130 mm stroke and TC trunnion mount to push or redirect loaded pallets smoothly on conveyor lines.
Replacing the Airtac SI100 Standard Cylinder SI100X130STC with the SAI100X130STC
To replace the SI100X130STC, order the SAI100X130STC. Confirm the ISO 15552 TC trunnion mounting, 130 mm stroke, G1/2 port, and -S magnet for CS1-B/DS1-B switches (the SAI uses current AirTAC switches). If you need more force, the 125 mm bore offers 6136 N push at 0.5 MPa; if less is needed, the 80 mm bore provides 2513 N. Note that a plain cylinder drifts on air loss—the cushion only decelerates. For load holding, use an external rod lock, pilot check valve, or the SAIL/BSAI lock variant. At 130 mm stroke, side-load is minimal, but always guide the rod to prevent bending.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI100X130STC
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI100 Standard Cylinder SI100X130STC FAQ
Yes, the SI100X130STC is discontinued. The direct replacement is the SAI100X130STC. It is dimensionally interchangeable per ISO 15552, keeping the same 100 mm bore, 130 mm stroke, G1/2 port, TC mount, and output force.
This double-acting cylinder uses a G1/2 port. It delivers 3927 N push and 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, 7068 N push at 0.9 MPa, and a theoretical max of 801 kgf at 1.0 MPa.
Related AirTAC SAI Cylinders
Request a Quote for the SAI100X130STC
Send us the quantity and destination. We confirm price, stock and lead time on the SAI100X130STC replacement — usually within 7-8 hours.