This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI80X195, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI80 Standard Air Cylinder SI80X195
The AirTAC SI80 Standard Air Cylinder SI80X195 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 195mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI80X195, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke195 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAI80X195
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI80 Standard Air Cylinder SI80X195
The AirTAC SI80X195 is a discontinued double-acting ISO 15552 profile cylinder with an 80 mm bore and 195 mm stroke. It delivers 2513 N push and 2268 N pull at 0.5 MPa through a G3/8 port. The direct replacement is the SAI80X195, retaining the exact bore, stroke, force, port and mounting interface.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. This no-magnet SKU cannot take a sensor, unlike the CS1-B/DS1-B legacy switches used on -S models.
Airtac SI80 Standard Air Cylinder SI80X195 Technical Specifications
| Model | Airtac SI80 Standard Air Cylinder SI80X195 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI80X195 |
| Bore size | Ø80 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI80X195 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAI80X195 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI80 Standard Air Cylinder SI80X195
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI80 Standard Air Cylinder SI80X195 Is Used
Press Fit Tooling
Drives medium-force press operations for fitting bearings and pins, utilising the 2513 N push force at 0.5 MPa.
Pallet Diverting
Actuates heavy-duty conveyor diverters and lane changers, benefiting from the 30-800 mm/s speed range.
Replacing the Airtac SI80 Standard Air Cylinder SI80X195 with the SAI80X195
To replace the SI80X195, order the SAI80X195. Verify the ISO 15552 mounting interface, G3/8 port, M20x1.5 rod thread and 36 mm cushions. Because this is a no-S SKU, it cannot accept a magnetic sensor. If sizing down, the 63 mm bore gives 1559 N push at 0.5 MPa; if sizing up, the 100 mm bore gives 3927 N. For load holding on air loss, note the cushion only decelerates; add an external rod lock, pilot check valve, or use the SAIL or BSAI lock variant. Stroke is under 300 mm so rod-bending side-load risks are minimal.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI80X195
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI80 Standard Air Cylinder SI80X195 FAQ
Yes, the SI80X195 is discontinued. The direct replacement is the AirTAC SAI80X195. It is dimensionally interchangeable per ISO 15552, matching the 80 mm bore, 195 mm stroke, 513 kgf max force, G3/8 port and mounting fixtures.
It features a G3/8 air port. Force output is 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, 4523 N push at 0.9 MPa, and a theoretical maximum of 513 kgf at 1.0 MPa.
Request a Quote for the SAI80X195
Send us the quantity and destination. We confirm price, stock and lead time on the SAI80X195 replacement — usually within 7-8 hours.