This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAID160X220, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SID Series Double-Rod Cylinder SID160X220
The AirTAC Airtac SID Series Double-Rod Cylinder SID160X220 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 220mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAID160X220, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ160 mm
- Stroke220 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- StatusDiscontinued → SAID160X220
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SID Series Double-Rod Cylinder SID160X220
The AirTAC SID160X220 is a double-acting, double-rod ISO 15552 cylinder where a rod exits both ends, making push and pull force equal at 9425 N (@0.5 MPa). This legacy model is discontinued; the direct replacement is the SAID160X220, matching the 160mm bore, 220mm stroke, G3/4 port, and ISO 15552 mounting interface.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and long life. This non-magnetic SKU cannot accept switches, and the air cushion only decelerates; use an external rod lock for load holding.
Airtac SID Series Double-Rod Cylinder SID160X220 Technical Specifications
| Model | Airtac SID Series Double-Rod Cylinder SID160X220 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAID160X220 |
| Bore size | Ø160 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAID160X220 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAID160X220 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SID Series Double-Rod Cylinder SID160X220
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SID Series Double-Rod Cylinder SID160X220 Is Used
Equal-Force Pressing
Applies 9425 N of identical force on both advance and retract strokes for precision metalforming tasks.
Dual-Tool Transfer
The extended back rod simultaneously drives a secondary gripper, moving parts on an assembly line.
Replacing the Airtac SID Series Double-Rod Cylinder SID160X220 with the SAID160X220
To replace the discontinued SID160X220, install the direct replacement SAID160X220, reusing the existing ISO 15552 mounting (Basic, FA, LB, TC). A double-rod design is right when you need equal force both ways, anti-rotation stability, or a back rod to drive a second tool. Size both ways by checking neighbor bores (125mm or 200mm) against the 9425 N @0.5 MPa equal force. This SKU lacks the -S magnet and cannot take sensors. For stroke lengths of 300mm or longer, verify the side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same ISO 15552 interface → SAID160X220
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SID Series Double-Rod Cylinder SID160X220 FAQ
Yes, the SID160X220 is discontinued. The direct replacement is the SAID160X220, which shares the same ISO 15552 interface, 160mm bore, 220mm stroke, G3/4 port, and equal-both-ways force.
Force is equal both ways: 9425 N @0.5 MPa, 13194 N @0.7 MPa, and 16964 N @0.9 MPa. The air port is G3/4, speed is 30-500 mm/s, and it uses a 40mm rod with M36x2 threading.
Related AirTAC SAI Cylinders
Request a Quote for the SAID160X220
Send us the quantity and destination. We confirm price, stock and lead time on the SAID160X220 replacement — usually within 7-8 hours.