This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ160X110-30 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ160X110-30 in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X110-30
The AirTAC Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X110-30 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 110mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ160X110-30, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ160 mm
- Stroke110 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- StatusDiscontinued → SAIJ160X110-30
About the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X110-30
The AirTAC SIJ160X110-30 is a discontinued double-acting single-rod ISO 15552 adjustable-stroke cylinder with a 160mm bore and 110mm maximum extend stroke. An external stop screw lets you trim the extend stroke by up to 30mm on-site, yielding a usable 80-110mm stroke window. This G3/4 ported model delivers 10053N push and 9425N pull at 0.5MPa, peaking at 18095N push at 0.9MPa. The stop sets the end position but is not a load lock; the piston drifts on air loss.
The exact drop-in replacement is the SAIJ160X110-30, matching the ISO 15552 mounting interface, bore, force, and adjust window. The upgraded SAI family uses a two Y-shaped one-way piston seal for low start-up pressure and long life. For sizing, a safe working load is ~6032N (60% of the 0.5MPa push), allowing a ~512kg vertical lift with a 2:1 margin. This non-magnetic SKU cannot take a switch; for load holding, use SAIL or BSAI lock variants.
Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X110-30 Technical Specifications
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X110-30 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X110-30 |
| Bore size | Ø160 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X110-30 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X110-30 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X110-30
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X110-30 Is Used
Press Fit Tuning
Allows operators to dial in the exact 80-110mm insertion depth for large bushings on-site, avoiding hard mechanical stops during assembly.
Heavy Staking Setup
Provides adjustable end-position for a 160mm bore staking head, letting technicians trim the 30mm window to perfect crimp height without re machining fixtures.
Pallet Positioning
Handles large payload diverting where the extend stroke must be finely tuned to match varying pallet widths safely within the 110mm limit.
Replacing the Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X110-30 with the SAIJ160X110-30
To replace the discontinued SIJ160X110-30, order the drop-in SAIJ160X110-30, which preserves the 30mm adjust window, G3/4 port, and 50mm cushions. To size both ways: the neighboring 125mm bore yields 6136N push at 0.5MPa, while the 200mm bore yields 15708N push at 0.5MPa. Choose the 30mm adjust window if you need to tune the extend end-position within an 80-110mm range. Mounting reuses ISO 15552 FA, LB, or TC interfaces. Because this SKU lacks the -S suffix, it cannot accept a magnetic switch. For stroke lengths >=300mm, verify side-load guide tolerances to prevent rod binding.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ160X110-30
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X110-30 FAQ
Yes, the SIJ160X110-30 is discontinued. The exact drop-in replacement is the SAIJ160X110-30, offering the same ISO 15552 interface, 160mm bore, 110mm stroke, 30mm adjust window, and G3/4 port.
It delivers 10053N push and 9425N pull at 0.5MPa, 14074N push at 0.7MPa, and 18095N push at 0.9MPa. The external stop screw provides a 30mm adjust window, shortening the 110mm maximum extend stroke down to 80mm. Note the stop sets end position and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ160X110-30
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ160X110-30 replacement — usually within 7-8 hours.