This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ160X350-50S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.

The AirTAC SIJ160 Double Rod Adjustable Cylinder SIJ160X350-50S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø160mm bore and 350mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ160X350-50S, which matches its ISO interface, bore, stroke, force and mounting.
The AirTAC SIJ160X350-50S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 160mm bore and 350mm maximum stroke. An external stop screw lets you trim the extend stroke on-site by up to 50mm, yielding a usable 300-350mm end position. It features a 40mm rod, M36x2 thread, G3/4 port, and 50mm adjustable air cushions. The direct replacement is the SAIJ160X350-50S, retaining the exact ISO 15552 mounting interface, bore, and force.
The SAIJ successor employs an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life. Note the stop screw sets end position only; it is not a load lock, so use an external rod lock for held loads.
| Model | Airtac SIJ160 Double Rod Adjustable Cylinder SIJ160X350-50S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ160X350-50S |
| Bore size | Ø160 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ160X350-50S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
The SAIJ160X350-50S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 160 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Needs field stroke tuning to set precise 300-350mm pressing depths on large assemblies without swapping the entire actuator.
Requires adjustable extend stops to accommodate varying pallet widths on a 160mm bore line handling high 9425N pull loads.
Demands exact end-position tweaking via the 50mm external screw to compensate for mold wear in heavy industrial forming.
To replace the discontinued SIJ160X350-50S, order the direct replacement SAIJ160X350-50S, which preserves the G3/4 port, 50mm adjust window, and FA/LB/TC mountings. Choose the 50mm adjust window if your final extend position needs on-site tuning between 300-350mm. Because the -S suffix provides a piston magnet for legacy CS1-B/DS1-B switches, specify current AirTAC sensors for the SAIJ. For the 350mm stroke, ensure external guides to prevent rod bending and manage side loads. Operating speed is 30-500mm/s.
AirtacDistr lists every SIJ160 order code with its price on one page at https://airtacdistr.com/products/airtac-sij160-adjustable-cylinder
Replacement checklist
Yes, the SIJ160X350-50S is discontinued. The direct replacement is the SAIJ160X350-50S, sharing the same ISO 15552 interface, 160mm bore, 350mm stroke, 50mm adjust window, and G3/4 port. The SAIJ uses an upgraded piston seal and current switches.
The external stop screw provides a 50mm adjust window, allowing you to shorten the 350mm extend stroke down to 300mm on-site. The stop sets position only and is not a load lock.
Send us the quantity and destination. We confirm price, availability and lead time on the SAIJ160X350-50S replacement — usually within 7 hours.