This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ32X130-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X130-10S
The AirTAC SIJ32 Double Rod Adjustable Cylinder SIJ32X130-10S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 130mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ32X130-10S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke130 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAIJ32X130-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X130-10S
The AirTAC SIJ32X130-10S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 32mm bore and 130mm maximum stroke. An external stop screw lets you trim the extend stroke by up to 10mm on-site, yielding a usable 120-130mm extension. The direct replacement is the SAIJ32X130-10S, retaining the G1/8 port, M10x1.25 rod thread, and 27mm adjustable cushions.
The SAIJ successor incorporates an upgraded piston seal using two Y-shaped one-way elements for lower start-up pressure and longer life. The stop screw sets end position only; it is not a load lock.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X130-10S Technical Specifications
| Model | Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X130-10S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ32X130-10S |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ32X130-10S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAIJ32X130-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X130-10S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X130-10S Is Used
Diverter Gate Positioning
Trimming the extend stroke by up to 10mm on-site allows precise gate alignment without machining spacers.
Package Stopper Height
Adjustable end position accommodates varying carton profiles on a 32mm bore line.
Light Press Fit Tuning
Dial in the exact 120-130mm extend reach for delicate component seating.
Replacing the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X130-10S with the SAIJ32X130-10S
To replace the discontinued SIJ32X130-10S, order the direct replacement SAIJ32X130-10S, keeping the identical ISO 15552 mounting interface, 130mm stroke, and 10mm adjust window. Choose the 10mm adjust window for fine end-position tuning. Reuse FA, LB, or TC mounts. The -S suffix indicates a piston magnet for CS1-B/DS1-B switches. For strokes >=300mm, guide the rod to prevent side-load wear.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ32X130-10S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X130-10S FAQ
Yes, the SIJ32X130-10S is discontinued. The direct replacement is the SAIJ32X130-10S, matching the 32mm bore, 130mm stroke, 10mm adjust window, G1/8 port, and ISO 15552 mounting.
The external stop screw window is 10mm, allowing a usable extend stroke of 120-130mm. The stop sets end position and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ32X130-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ32X130-10S replacement — usually within 7-8 hours.