This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ63X700-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ63 Double Rod Adjustable Cylinder SIJ63X700-10S
The AirTAC SIJ63 Double Rod Adjustable Cylinder SIJ63X700-10S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø63mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ63X700-10S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAIJ63X700-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ63 Double Rod Adjustable Cylinder SIJ63X700-10S
The AirTAC SIJ63X700-10S is a double-acting double-rod ISO 15552 adjustable-stroke cylinder, now discontinued and superseded by the direct replacement SAIJ63X700-10S. An external stop screw lets you trim the extend stroke by up to 10 mm on-site, giving a usable 690-700 mm stroke window (the 700 mm nominal is the maximum).
The SAIJ successor retains the ISO 15552 mounting interface and adds an upgraded two-piece Y-shaped piston seal for lower start-up pressure and longer life. Note the stop screw sets end position only; it is not a load lock, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac SIJ63 Double Rod Adjustable Cylinder SIJ63X700-10S Technical Specifications
| Model | Airtac SIJ63 Double Rod Adjustable Cylinder SIJ63X700-10S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ63X700-10S |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ63X700-10S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAIJ63X700-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ63 Double Rod Adjustable Cylinder SIJ63X700-10S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ63 Double Rod Adjustable Cylinder SIJ63X700-10S Is Used
Press Fit Tuning
Needs field stroke tuning to dial in a 690-700 mm press stroke for seating bearings without over-traveling.
End-Stop Adjustment
Requires trimming the extend stroke by up to 10 mm on-site to align a 63 mm bore pusher with varying package widths.
Dispense Positioning
Demands precise end-position setting via the external stop screw for a 700 mm travel adhesive dispensing head.
Replacing the Airtac SIJ63 Double Rod Adjustable Cylinder SIJ63X700-10S with the SAIJ63X700-10S
To replace the discontinued SIJ63X700-10S, order the direct replacement SAIJ63X700-10S, keeping the 63 mm bore, 700 mm stroke, 10 mm adjust window, and -S magnet for CS1-B/DS1-B switches. Choose the 10 mm adjust window for fine end-position tuning rather than large travel changes. Mounting options include FA, LB, and TC brackets. Because the 700 mm stroke is long, ensure external guides to prevent rod bending and side-load wear.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ63X700-10S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ63 Double Rod Adjustable Cylinder SIJ63X700-10S FAQ
Yes, the SIJ63X700-10S is discontinued. The direct replacement is the SAIJ63X700-10S, sharing the same ISO 15552 interface, 63 mm bore, 700 mm stroke, 10 mm adjust window, and G3/8 port.
The external stop screw window is 10 mm, allowing an extend stroke of 690-700 mm.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ63X700-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ63X700-10S replacement — usually within 7-8 hours.