Airtac SSA Single-Acting Compact Cylinder SSA16X30SB
1. Complies with enterprise standards;
2. Features riveted structure between cylinder body/rear cover and piston/piston rod for compact reliability;
3. Hard-anodized inner bore surface after roller burnishing ensures superior wear resistance and durability;
4. Custom-engineered bidirectional piston sealing with integrated oil reservoir in space-saving design;
5. Ultra-compact profile optimizes installation space utilization;
6. Perimeter sensor grooves enable simplified sensor mounting;
7. Multiple specifications available with configurable cylinder options.
Category: Compact Cylinders | Brand: AIRTAC | Series: SSA
AirTAC SSA16X30SB Single-Acting Compact Cylinder Specifications
- Model: SSA16X30SB
- Type: Single-acting spring return (push type)
- Bore size: 16mm
- Stroke: 30mm (±1.5mm tolerance)
- Operating pressure: 0.05–0.9 MPa
- Operating temperature: -20℃ to 80℃
- Port size: M5x0.8 (dual auto switch ports optional)
- Cushioning: Fixed rubber bumper
- Seal material: Heat-resistant NBR (nitrile rubber)
- Mounting type: Basic non-magnetic base (optional accessories available)
- Weight: 0.23kg (bare cylinder), 0.28kg with magnet
- Dimensions:
- Length: 88mm (full extension)
- Body width: 34mm
- Height: 34mm (excluding mounting protrusions)
- Rod thread: M6x1.0
- Max piston speed: 500mm/s
- Lubrication: Pre-lubricated (use ISO VG32 turbine oil if re-lubrication needed)
- Protection rating: IP65 (dust-tight & protected against water jets)
Ultra-slim profile cylinder optimized for space-constrained automation systems. Features anodized aluminum construction with hardened stainless steel piston rod (HRC 35-40). The magnet-embedded piston enables position feedback when used with magnetic sensors. Designed for 500km minimum service life under standard operating conditions.
- PCB handling robots in electronics assembly
- Precision clamping mechanisms
- Medical device actuator systems
- Vertical lift gates in cleanroom environments
- Automatic paper feed mechanisms
Installation recommendation:
For vertical mounting orientations exceeding 45°, install an external guide mechanism to prevent side load. Use 5μm filtered air with dew point -20℃ below ambient temperature. Maximum lateral load: 3N at full extension.
| Property | Property Value |
|---|---|
| sku | SSA16X30SB |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Piston Rod Thread Type | External Thread |
| Magnet | S-Magnetic |
| Cushion Type | Bumper Pad |
| Bore Diameter | 16mm |
| Stroke | 30mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.