Airtac STA Single Acting Compact Guided Cylinder STA63X15
The AirTAC Airtac STA Single Acting Compact Guided Cylinder STA63X15 is a genuine single-acting COMPACT cylinder (single acting, pull type) with a Ø63mm bore and 15mm stroke. Air pulles the rod and an internal spring returns it, so one solenoid line drives the motion — ideal for short-stroke clamping and ejection in tight spaces.
- BoreØ63 mm
- Stroke15 mm
- Port sizePT1/4
- Acting typeSingle acting, pull type
- Rod threadM10×1.5 (F) / M18×1.5 (B)
- CushionFixed NBR bumper
About the Airtac STA Single Acting Compact Guided Cylinder STA63X15
The AirTAC STA63X15 is a compact single-acting pull-type cylinder where air retracts the rod and an internal spring extends it back out. It provides a robust 1225.5 N net pull at 0.5 MPa, making it suitable for heavy-duty tensioning and pulling applications. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit.
This unit requires only one air line and one solenoid port to operate, as the internal spring handles the extension stroke. It features a 20 mm piston rod, a PT1/4 air port, and a fixed NBR bumper that decelerates the stroke end rather than relying on an adjustable air cushion.
Airtac STA Single Acting Compact Guided Cylinder STA63X15 Technical Specifications
| Model | Airtac STA Single Acting Compact Guided Cylinder STA63X15 |
|---|---|
| Series | STA compact single-acting cylinder |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Single acting, pull type |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed NBR bumper |
| Max standard stroke | Up to 30 mm |
Specifications follow the official AirTAC SDA-family datasheet. Single-acting types start at 0.2 MPa (the spring must be overcome). Confirm against the product label before installation.
Net Output Force (Ø63mm, Pull)
| Pressure | Pull force (net) |
|---|---|
| 0.5 MPa | 1226 N |
| 0.7 MPa | 1786 N |
These are NET output forces — the return-spring force is already deducted. Single-acting pull only; the spring performs the opposite stroke. Size with a safety margin.
Model Code: Airtac STA Single Acting Compact Guided Cylinder STA63X15
| STA | Compact single acting, pull type cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm (single-acting max 30 mm). |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard. SSA pushes out / spring returns; STA pulls in / spring extends. Related: SDA (double acting), SDAD (double rod), SDAJ (adjustable stroke).
Where the Airtac STA Single Acting Compact Guided Cylinder STA63X15 Is Used
Heavy-Duty Tensioning
Utilize the 1225.5 N net pull to maintain high tension on cables or heavy webbing, retracting the load securely when pressurized.
Pallet Gate Return
Spring-extends to push a safety gate open by default, using the 15 mm stroke and air retraction to pull it closed during loading cycles.
Vertical Lift Lowering
Lift loads up to 62.5 kg with a 2:1 safety margin, relying on air to pull the weight down and the spring to passively raise it.
Is the Airtac STA Single Acting Compact Guided Cylinder STA63X15 the Right Cylinder?
When sizing this model, compare its 1225.5 N net pull at 0.5 MPa with the next size down: the STA50 bore provides 717.7 N at the same pressure. Stepping up to the 63 mm bore is necessary when your load exceeds the 50 mm limits, offering a safe working load of roughly 735 N (about 60% of the 0.5 MPa figure) or a vertical lift of approximately 62.5 kg with a 2:1 margin.
Remember the 30 mm maximum standard stroke ceiling and the spring-extend behavior: on air loss, the spring drives the rod out, so it does not hold a mid-stroke load without live pressure or an external lock. This specific configuration has a 15 mm stroke, a 63 mm bore, a PT1/4 port, no piston magnet, and a female M10x1.5 rod-end thread.
Quick checklist
- ✓ Net pull force at your working pressure
- ✓ Stroke ≤ 30 mm (single-acting limit)
- ✓ Single air line saves a valve/port
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Remember the spring performs the return stroke.
- check Avoid side load on the short piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac STA Single Acting Compact Guided Cylinder STA63X15 FAQ
The STA63X15 generates 1225.5 N of net pull force at 0.5 MPa and 1786.2 N at 0.7 MPa. These figures already account for the internal return spring resistance.
No, this specific SKU lacks the -S option and has no piston magnet, so it cannot accept reed or electronic switches. You must select the -S variant to enable position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC STA Cylinders
Request a Quote for Airtac STA Single Acting Compact Guided Cylinder STA63X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.