This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU32X60, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU32~50 Standard Cylinder SU32X60
The AirTAC SU32~50 Standard Cylinder SU32X60 is a double-acting profile-type standard cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU32X60, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAU32X60
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU32~50 Standard Cylinder SU32X60
The AirTAC SU32X60 is a discontinued double-acting profile cylinder with a 32 mm bore and 60 mm stroke. It delivers 402 N push force at 0.5 MPa through a 1/8" port. AirTAC replaced this unit with the SAU32X60, a direct alternative retaining the exact bore, stroke, output force, port size and SC-series mounting. The extruded aluminum profile body is more compact than a standard ISO 15552 cylinder of the same bore.
This non-magnetic SKU cannot accept a sensor. If you previously used an -S variant, the legacy CS1-B/DS1-B switches are obsolete; the SAU replacement utilizes current CMSG/DMSG/EMSG sensors. The SAU family also introduces a SAUF variant with a built-in 4M solenoid valve, an option the original SU line never offered.
Airtac SU32~50 Standard Cylinder SU32X60 Technical Specifications
| Model | Airtac SU32~50 Standard Cylinder SU32X60 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU32X60 |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU32X60 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAU32X60 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU32~50 Standard Cylinder SU32X60
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU32~50 Standard Cylinder SU32X60 Is Used
Package Diverting
Actuates a short 60 mm stroke diverter arm to route small boxes on a manufacturing line.
Clamp Actuation
Provides reliable 402 N push force at 0.5 MPa to secure small workpieces during light machining.
Replacing the Airtac SU32~50 Standard Cylinder SU32X60 with the SAU32X60
To replace this SU32X60, order the SAU32X60. Verify your 1/8" port thread (PT, G or NPT) and SC-series mounting hardware (LB, FA, FB, CA, CB, TC). Because this specific SKU lacks a magnet, it cannot support position sensing. If your machine requires switches, order the SAU32X60-S and upgrade to the modern CMSG/DMSG/EMSG sensor family. For higher force demands, a 40 mm bore provides 628 N push at 0.5 MPa; for lighter loads, this 32 mm bore is optimal. Note that a standard cylinder drifts on air loss—the 21 mm adjustable cushion only decelerates the piston near stroke end, so install an external rod lock or pilot-operated check valve for secure load holding.
Replacement checklist
- ✓ Same bore / stroke → SAU32X60
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU32~50 Standard Cylinder SU32X60 FAQ
Yes, the AirTAC SU32X60 is discontinued and end-of-life. The direct replacement is the SAU32X60. It shares the same 32 mm bore, 60 mm stroke, 402 N force, 1/8" port and SC-series mounting, so it drops right into your existing application.
At 0.5 MPa it provides 402 N push and 345 N pull force, scaling to 563 N push at 0.7 MPa, 724 N at 0.9 MPa, and a maximum theoretical force of 82 kgf at 1.0 MPa. This specific SU32X60 SKU has no magnet and cannot take a sensor. If you need sensing, the SAU32X60-S replacement uses current CMSG/DMSG/EMSG switches instead of the legacy CS1-B/DS1-B.
Request a Quote for the SAU32X60
Send us the quantity and destination. We confirm price, stock and lead time on the SAU32X60 replacement — usually within 7-8 hours.