This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU32X75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU32~50 Standard Cylinder SU32X75S
The AirTAC Airtac SU32~50 Standard Cylinder SU32X75S is a double-acting profile-type standard cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU32X75S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAU32X75S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU32~50 Standard Cylinder SU32X75S
The AirTAC SU32X75S is a discontinued double-acting profile-type cylinder with a 32 mm bore and 75 mm stroke, delivering 402 N push force at 0.5 MPa. AirTAC replaced this unit with the SAU32X75S, a direct alternative retaining the exact bore, stroke, output, 1/8" port and SC-series mounting footprint.
This compact extruded-aluminium body is shorter than an ISO 15552 cylinder of the same size. The -S suffix indicates a piston magnet for legacy CS1-B/DS1-B switches; the SAU replacement upgrades this to CMSG/DMSG/EMSG sensors.
Airtac SU32~50 Standard Cylinder SU32X75S Technical Specifications
| Model | Airtac SU32~50 Standard Cylinder SU32X75S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU32X75S |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU32X75S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAU32X75S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU32~50 Standard Cylinder SU32X75S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU32~50 Standard Cylinder SU32X75S Is Used
Small Part Ejection
Uses the 402 N push force at 0.5 MPa to reliably knock lightweight moulded parts from a fixture.
Package Diverting
Executes 75 mm strokes to push small cartons between adjacent conveyor lanes.
Bin Sorting
Actuates routing gates in distribution hubs where a compact 32 mm body profile is required.
Replacing the Airtac SU32~50 Standard Cylinder SU32X75S with the SAU32X75S
To replace the SU32X75S, order the SAU32X75S, confirming the 1/8" port, M10x1.25 rod thread and SC-series mounting (LB/FA/FB/CA/CB) are retained. Because this unit has the -S magnet, note that your legacy CS1-B/DS1-B switches must change to the current CMSG/DMSG/EMSG family on the SAU. If your application needs higher force, the neighbouring 40 mm bore provides 628 N push at 0.5 MPa. For intermediate stopping rather than end-of-stroke deceleration, the 21 mm adjustable cushion is not a brake; add an external rod lock or pilot-operated check valve, as the cylinder drifts without live air. The SAU line also adds a SAUF variant with a built-in 4M solenoid valve the SU lacked.
Replacement checklist
- ✓ Same bore / stroke → SAU32X75S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU32~50 Standard Cylinder SU32X75S FAQ
Yes, the SU32X75S is end-of-life. The direct replacement is the AirTAC SAU32X75S. It matches the 32 mm bore, 75 mm stroke, 402 N force, 1/8" port and SC-series mounting. The only change is that the -S magnet now uses CMSG/DMSG/EMSG switches instead of the older CS1-B/DS1-B sensors.
The 32 mm bore features a 1/8" port and M10x1.25 rod thread. It delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, 724 N push at 0.9 MPa, and a theoretical maximum of 82 kgf at 1.0 MPa. Operating speed is 30-800 mm/s.
Request a Quote for the SAU32X75S
Send us the quantity and destination. We confirm price, stock and lead time on the SAU32X75S replacement — usually within 7-8 hours.