This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU32X850SH, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU32~50 Standard Cylinder SU32X850SH
The AirTAC SU32~50 Standard Cylinder SU32X850SH is a double-acting profile-type standard cylinder with a Ø32mm bore and 850mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU32X850SH, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke850 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAU32X850SH
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU32~50 Standard Cylinder SU32X850SH
The AirTAC SU32X850SH is a discontinued double-acting profile-type cylinder with a 32mm bore and 850mm stroke. It delivers 402N push force at 0.5MPa and features a 1/8" port. The direct replacement is the SAU32X850SH, matching the exact bore, stroke, output force, port size, and SC-series mounting.
This unit includes a piston magnet for legacy CS1-B/DS1-B switches; upgrading to the SAU requires current CMSG/DMSG/EMSG sensors. The SAU family also adds a SAUF valve-integrated option. The -H Viton seal extends operating temperature to 0-150C.
Airtac SU32~50 Standard Cylinder SU32X850SH Technical Specifications
| Model | Airtac SU32~50 Standard Cylinder SU32X850SH |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU32X850SH |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU32X850SH carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAU32X850SH produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU32~50 Standard Cylinder SU32X850SH
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU32~50 Standard Cylinder SU32X850SH Is Used
High-Temp Diverting
Actuates diverter arms on hot-end conveyor lines using the Viton -H seal to withstand 150C ambient heat while pushing light packages.
Extended Transfer
Drives long-travel pneumatic transfer carts between workstations, relying on adjustable 21mm cushions to decelerate at stroke ends.
Replacing the Airtac SU32~50 Standard Cylinder SU32X850SH with the SAU32X850SH
To replace this SU32X850SH, order the SAU32X850SH direct equivalent, verifying the 32mm bore, 850mm stroke, 1/8" port, M10x1.25 rod thread, and SC-series mounting. Because the -S magnet is present, note that your legacy CS1-B/DS1-B switches must change to CMSG/DMSG/EMSG sensors on the SAU. The -H Viton seal is required for 0-150C high-temperature environments. If sizing down, a 32mm bore at 0.5MPa gives 402N push; if sizing up, consider larger bores for more thrust. A plain cylinder does not hold load without live air—the cushion only decelerates—so use an external rod lock or pilot-operated check valve for holding. At 850mm stroke, prevent rod bending by supporting the load with external guides to minimize side loads.
Replacement checklist
- ✓ Same bore / stroke → SAU32X850SH
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU32~50 Standard Cylinder SU32X850SH FAQ
Yes, the AirTAC SU32X850SH is discontinued. The direct replacement is the SAU32X850SH. It matches the original 32mm bore, 850mm stroke, 402N force, 1/8" port, and SC-series mounting. You must upgrade your sensors, as the SAU uses CMSG/DMSG/EMSG switches instead of the legacy CS1-B/DS1-B.
The 32mm bore provides 402N push and 345N pull at 0.5MPa, 563N push at 0.7MPa, 724N push at 0.9MPa, and a maximum theoretical force of 82kgf at 1.0MPa. The -H Viton seal allows operation from 0 to 150C. The cylinder speed ranges from 30-800mm/s.
Related AirTAC SAU Cylinders
Request a Quote for the SAU32X850SH
Send us the quantity and destination. We confirm price, stock and lead time on the SAU32X850SH replacement — usually within 7-8 hours.