This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU100X1500TC, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU100X1500TC
The AirTAC SU63-100 Standard Cylinder SU100X1500TC is a double-acting profile-type standard cylinder with a Ø100mm bore and 1500mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU100X1500TC, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke1500 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAU100X1500TC
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU100X1500TC
The AirTAC SU100X1500TC is a discontinued double-acting profile-type standard cylinder featuring a 100mm bore, 1500mm stroke, and a TC mounting interface. It delivers a robust 3927 N push force at 0.5 MPa (3681 N pull) through a 1/2" port and a 25mm piston rod. AirTAC replaced this end-of-life unit with the SAU100X1500TC, a direct upgrade retaining the exact same body dimensions, force output, port size, and SC-series mounting accessories.
When upgrading, note that the SAU body is shorter and more compact than an ISO 15552 cylinder of the same bore. Because this specific SKU lacks a magnet, it cannot accept a position sensor; if sensing is needed, the SAU replacement requires the current CMSG/DMSG/EMSG switches rather than the legacy CS1-B/DS1-B. The SAU family also introduces the SAUF variant with a built-in 4M solenoid valve, an option the SU line never offered.
Airtac SU63-100 Standard Cylinder SU100X1500TC Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU100X1500TC |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU100X1500TC |
| Bore size | Ø100 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU100X1500TC carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAU100X1500TC produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU100X1500TC
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU100X1500TC Is Used
Heavy Material Transfer
Drives large fabricated components along extended assembly lines, utilizing the 3927 N push force to overcome inertia on heavy pallets over the full 1500mm travel.
Pallet Push-Off System
Executes long-range sweeping motions to push heavy inventory loads onto discharge rollers, relying on the TC mount to stabilize the extended 100mm bore body.
Automated Lift Gate
Raises and lowers loaded staging platforms, safely moving approximately 200 kg vertical loads while external guides absorb side-load forces during the 1500mm stroke.
Replacing the Airtac SU63-100 Standard Cylinder SU100X1500TC with the SAU100X1500TC
To replace the discontinued SU100X1500TC, order the SAU100X1500TC direct equivalent, confirming the 100mm bore, 1500mm stroke, 1/2" port (PT/G/NPT), M20x1.5 rod thread, and TC mounting accessory are retained. Since this SKU has no magnet (-S), it cannot support a sensor; if you need position detection, specify an SAU model with the magnet and use CMSG/DMSG/EMSG switches. Verify your force requirements both ways: stepping down to an 80mm bore yields 2513 N push at 0.5 MPa, while this 100mm bore provides 3927 N. Note that a plain cylinder does not hold load on air loss—the cushion only decelerates—so use an external rod lock or pilot-operated check valve for suspended loads. Finally, at 1500mm, the 25mm rod is susceptible to bending; use external guides to prevent side-load damage.
Replacement checklist
- ✓ Same bore / stroke → SAU100X1500TC
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU100X1500TC FAQ
Yes, the SU100X1500TC is discontinued. The direct replacement is the SAU100X1500TC, which matches the 100mm bore, 1500mm stroke, 1/2" port, 3927 N force, and TC mounting interface.
At 0.5 MPa it pushes 3927 N and pulls 3681 N; at 0.7 MPa it pushes 5497 N, with a theoretical max of 801 kgf at 1.0 MPa. This specific SKU lacks a magnet and cannot take a sensor; if needed, the SAU replacement uses CMSG/DMSG/EMSG switches.
Related AirTAC SAU Cylinders
Request a Quote for the SAU100X1500TC
Send us the quantity and destination. We confirm price, stock and lead time on the SAU100X1500TC replacement — usually within 7-8 hours.