This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAUJ100X160-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ100X160-10S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ100X160-10S is a double-acting profile-type standard cylinder with a Ø100mm bore and 160mm stroke, 1/2" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAUJ100X160-10S, which matches its bore, stroke, force and mounting.
- BoreØ100 mm
- Stroke160 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAUJ100X160-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ100X160-10S
The AirTAC SUJ100X160-10S is a double-acting double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 10 mm on-site, yielding a usable 150-160 mm stroke. The nominal 160 mm is the maximum. This 100 mm bore unit features a 25 mm rod, M20x1.5 rod thread, and a 1/2 inch port.
This SUJ model is discontinued; the direct replacement is the SAUJ100X160-10S, retaining the same force, bore, and SC-series FA/LB mounting. The SAUJ upgrades to current CMSG/DMSG/EMSG sensors, whereas this unit uses legacy CS1-B/DS1-B switches. Note that the stop screw sets end position only; it is not a load lock, so use an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ100X160-10S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ100X160-10S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ100X160-10S |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ100X160-10S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
The SAUJ100X160-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ100X160-10S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ100X160-10S Is Used
Press Fit Tuning
Allows exact 0-10 mm on-site extend adjustment for pressing bearings where hard mechanical stops dictate final position.
Divertor Positioning
Fine-tunes the extend stroke on packaging lines to accommodate slight product size variations without re-mounting the cylinder.
Pallet Stop Calibration
Trims the extend stroke by up to 10 mm to dial in the exact stopping point for varying pallet widths at handling stations.
Replacing the Airtac SUJ Adjustable Cylinder SUJ100X160-10S with the SAUJ100X160-10S
To replace the discontinued SUJ100X160-10S, specify the SAUJ100X160-10S direct equivalent, which matches the 100 mm bore, 160 mm stroke, 10 mm adjust window, 1/2 inch port, and FA/LB mounting. Choose the 10 mm adjust window when you need precise on-site end-position tuning of up to 10 mm. Because this model includes a magnet (-S), you must migrate from legacy CS1-B/DS1-B switches to the modern CMSG/DMSG/EMSG sensors on the SAUJ. For strokes of 300 mm or longer, verify side-load limits to prevent guide wear.
Replacement checklist
- ✓ Same bore / stroke → SAUJ100X160-10S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ100X160-10S FAQ
Yes, the SUJ100X160-10S is discontinued. The direct replacement is the SAUJ100X160-10S, which shares the same 100 mm bore, 160 mm stroke, 10 mm adjust window, 1/2 inch port, and FA/LB mounting. The SAUJ also introduces the SAUF built-in-valve variant and uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The external stop screw window is 10 mm, allowing you to shorten the 160 mm nominal extend stroke down to 150 mm on-site. The stop sets the end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ100X160-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ100X160-10S replacement — usually within 7-8 hours.