This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAUJ32X60-30S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAUJ32X60-30S in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X60-30S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X60-30S is a double-acting profile-type standard cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUJ32X60-30S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X60-30S
About the Airtac SUJ Adjustable Cylinder SUJ32X60-30S
The AirTAC SUJ32X60-30S is a discontinued double-acting single-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 30 mm on-site, giving a usable extend range of 30 to 60 mm from the 60 mm nominal maximum. The stop sets the end position but is not a load lock. Bore 32 mm delivers 402 N push and 345 N pull at 0.5 MPa, scaling to 563 N at 0.7 MPa and 724 N at 0.9 MPa, with a 1/8" port and M10x1.25 rod thread.
This unit is discontinued and the drop-in replacement is the SAUJ32X60-30S, which retains the exact bore, stroke, force, port, and FA/LB mounting. The SAUJ upgrades to current CMSG/DMSG/EMSG sensors, whereas this legacy SUJ used CS1-B/DS1-B switches. For sizing, a safe working load is roughly 241 N (60% of the 0.5 MPa push), equating to a 20 kg vertical lift with a 2:1 margin. A plain cylinder drifts on air loss, so add an external rod lock for held loads.
Airtac SUJ Adjustable Cylinder SUJ32X60-30S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X60-30S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X60-30S |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X60-30S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X60-30S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X60-30S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X60-30S Is Used
Probe Contact Testing
Dial in the exact extend contact point on delicate electronic probes by trimming the stroke up to 30 mm on-site without swapping cylinders.
Variable Length Diverter
Adjust the diverter arm reach on a conveyor line to handle changing package sizes, setting the end position precisely at the machine.
Short-Stroke Clamping
Fine-tune clamping depth on small machined parts by using the stop screw to set a firm, repeatable 30 to 60 mm extend position.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X60-30S with the SAUJ32X60-30S
To replace the discontinued SUJ32X60-30S, order the drop-in SAUJ32X60-30S; it matches the 32 mm bore, 60 mm nominal stroke, 30 mm adjust window, 1/8" port, and FA/LB mounting. When sizing both ways, the neighboring 40 mm bore provides 628 N push at 0.5 MPa if more force is needed, while this 32 mm bore provides 402 N push at 0.5 MPa. Choose the 30 mm adjust window if you need field tuning of the extend stroke between 30 and 60 mm. Because this is an -S model, note the sensor change from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG. For strokes of 300 mm or longer, verify side-load limits to prevent rod binding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X60-30S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X60-30S FAQ
Yes, the SUJ32X60-30S is discontinued. The exact drop-in replacement is the SAUJ32X60-30S, which matches the 32 mm bore, 60 mm stroke, 30 mm adjust window, 1/8" port, and FA/LB mounting. The SAUJ uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The 32 mm bore provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, 724 N push at 0.9 MPa, and a theoretical max of 82 kgf at 1.0 MPa. The external stop screw allows you to trim the extend stroke by up to 30 mm on-site, yielding a usable extend range of 30 to 60 mm. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X60-30S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X60-30S replacement — usually within 7-8 hours.