This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAUJ32X60-40 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAUJ32X60-40 in place of this model. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X60-40
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X60-40 is a double-acting profile-type standard cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUJ32X60-40, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X60-40
About the Airtac SUJ Adjustable Cylinder SUJ32X60-40
The AirTAC SUJ32X60-40 is a double-acting single-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 40 mm on-site, yielding a usable 20-60 mm extend out of the 60 mm nominal maximum. The 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa, rising to 563 N at 0.7 MPa. This unit uses a 1/8" port and a 12 mm rod with an M10x1.25 thread.
This SUJ model is discontinued; the exact drop-in replacement is the SAUJ32X60-40, which retains the bore, stroke, force, port, and FA/LB mounting. For sizing, the 402 N push at 0.5 MPa yields a safe working load of roughly 241 N, or about 20 kg for vertical lift with a 2:1 margin. The SAUJ upgrade uses current CMSG/DMSG/EMSG sensors, whereas this legacy unit used CS1-B/DS1-B switches. This non-magnet SKU cannot take a switch, and the stop screw sets end position rather than locking the load.
Airtac SUJ Adjustable Cylinder SUJ32X60-40 Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X60-40 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X60-40 |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X60-40 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X60-40 produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X60-40
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X60-40 Is Used
Short-Stroke Clamping
Ideal for clamping stations where the exact jaw closure point must be dialed in on-site within the 20-60 mm window to accommodate varying material thicknesses.
Transfer Diverter
Used on conveyor lines to push packages, allowing maintenance to fine-tune the 40 mm extend stop so the diverter meets the lane guide precisely without repositioning the bracket.
Compact Ejector
Fits within tight machinery profiles to eject parts, using the external stop screw to shorten the extend stroke and prevent the rod from striking the machine guard.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X60-40 with the SAUJ32X60-40
To replace the discontinued SUJ32X60-40, order the drop-in SAUJ32X60-40, which matches the 32 mm bore, 60 mm stroke, 40 mm adjust window, 1/8" port, and FA/LB mounting. When sizing, the 32 mm bore yields 402 N push at 0.5 MPa; if you need less force, step down, or step up to a 40 mm bore for 628 N. The 40 mm adjust window is ideal when final end position must be set in the field, often beating a fixed SAU plus external stop. For stroke lengths of 300 mm or greater, verify side-load limits to prevent rod binding. Because this non-magnet SKU lacks a piston magnet, it cannot accept sensors; the SAUJ supports CMSG/DMSG/EMSG switches. The stop screw is an end-position adjuster, not a load lock—use an external rod lock for held loads.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X60-40
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X60-40 FAQ
Yes, the AirTAC SUJ32X60-40 is discontinued. The exact drop-in replacement is the SAUJ32X60-40, which matches the 32 mm bore, 60 mm stroke, 40 mm adjust window, 1/8" port, and FA/LB mounting. The SAUJ also uses current CMSG/DMSG/EMSG sensors instead of the legacy CS1-B/DS1-B switches.
The 32 mm bore provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, 724 N push at 0.9 MPa, and a theoretical max of 82 kgf at 1.0 MPa. The external stop screw allows you to trim the extend stroke by up to 40 mm on-site, giving a usable extend range of 20-60 mm. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X60-40
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X60-40 replacement — usually within 7-8 hours.