This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the drop-in replacement SAUJ32X85-30S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SUJ Adjustable Cylinder SUJ32X85-30S
The AirTAC Airtac SUJ Adjustable Cylinder SUJ32X85-30S is a double-acting profile-type standard cylinder with a Ø32mm bore and 85mm stroke, 1/8" air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAUJ32X85-30S, which matches its bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke85 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAUJ32X85-30S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SUJ Adjustable Cylinder SUJ32X85-30S
The AirTAC SUJ32X85-30S is a double-acting single-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 30 mm on-site, yielding a usable 55-85 mm extension from the 85 mm nominal maximum. It delivers 402 N push and 345 N pull at 0.5 MPa, scaling to 563 N at 0.7 MPa and 724 N at 0.9 MPa. The 32 mm bore features a 1/8" port, a 12 mm rod, and 21 mm adjustable cushions. This SUJ32X85-30S is discontinued; the exact drop-in replacement is the SAUJ32X85-30S, sharing the same body, force, and SC-series FA/LB mounting.
For sizing, a safe working load is roughly 241 N (60% of the 0.5 MPa push), translating to a 20 kg vertical lift with a 2:1 margin. The stop screw sets the end position but is not a load lock; use an external rod lock for held loads. The SAUJ upgrade replaces the legacy CS1-B/DS1-B sensors with current CMSG/DMSG/EMSG switches while retaining the compact profile barrel that is shorter than standard cylinders.
Airtac SUJ Adjustable Cylinder SUJ32X85-30S Technical Specifications
| Model | Airtac SUJ Adjustable Cylinder SUJ32X85-30S |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAUJ32X85-30S |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAUJ32X85-30S carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAUJ32X85-30S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SUJ Adjustable Cylinder SUJ32X85-30S
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SUJ Adjustable Cylinder SUJ32X85-30S Is Used
Diverter Gate Calibration
Trimming the extend stroke by up to 30 mm on-site lets operators dial in the exact flap angle for sorting products without machining custom spacers.
Variable Depth Forming
Adjust the end position between 55 and 85 mm to press or form materials to different depths on the same fixture, maximizing profile cylinder versatility.
Product Stop Positioning
Fine-tune the stopper height on a conveyor line to accommodate varying package sizes, using the external screw to set the precise extend limit.
Replacing the Airtac SUJ Adjustable Cylinder SUJ32X85-30S with the SAUJ32X85-30S
To replace the discontinued SUJ32X85-30S, specify the drop-in SAUJ32X85-30S, which matches the 32 mm bore, 85 mm nominal stroke, 30 mm adjust window, 1/8" port, and FA/LB mounting. When sizing both ways, the neighbouring 40 mm bore offers higher force (628 N push at 0.5 MPa), while dropping to a smaller bore reduces force. The 30 mm adjust window is ideal if your end-stop needs on-site tuning between 55 and 85 mm. Because this is an -S model, you must upgrade the position sensing from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG switches. For strokes of 300 mm or longer, verify side-load limits to prevent excessive rod wear. The external stop sets end position only; it is not a lock, so add an external rod lock for load holding.
Replacement checklist
- ✓ Same bore / stroke → SAUJ32X85-30S
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SUJ Adjustable Cylinder SUJ32X85-30S FAQ
Yes, the SUJ32X85-30S is discontinued. The exact drop-in replacement is the SAUJ32X85-30S, which matches the 32 mm bore, 85 mm stroke, 30 mm adjust window, 1/8" port, and FA/LB mounting. You only need to upgrade the position sensors from legacy CS1-B/DS1-B to current CMSG/DMSG/EMSG switches.
This double-acting single-rod cylinder delivers 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, 724 N push at 0.9 MPa, and a theoretical max of 82 kgf at 1.0 MPa. The external stop screw provides a 30 mm adjust window, allowing you to shorten the 85 mm nominal extend stroke down to 55 mm on-site. The stop sets end position and is not a load lock.
Related AirTAC SAU Cylinders
Request a Quote for the SAUJ32X85-30S
Send us the quantity and destination. We confirm price, stock and lead time on the SAUJ32X85-30S replacement — usually within 7-8 hours.