Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø20mm bore, 5mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ20 mm
- Stroke5 mm
- Port sizeM5×0.8
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S
The AirTAC TACQ20X5S is a double-acting JIS compact guided cylinder with a 20 mm bore and 5 mm stroke. Two stainless steel guide rods and a fixing plate replace a separate linear guide, driving and supporting the load simultaneously. This build provides a non-rotating tolerance of ±0.15° at the retracted position, handling lateral loads that a plain rod cannot.
Thrust equals a standard ACQ body, as the guides add stiffness rather than force. You get 157.1 N push and 117.8 N pull at 0.5 MPa, or 219.9 N push at 0.7 MPa. The unit features fixed elastomer bumpers, M5x0.8 ports, and an included piston magnet for position sensing.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø20 mm |
| Stroke | 5 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 118 N |
| 0.7 MPa | 220 N | — |
| Max (@1.0 MPa) | 32 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 20 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S Is Used
Pick-and-Place Head
Maintains exact angular alignment for small electronic component placement without twisting under lateral inertia.
Sensor Slide
Positions a vision camera or proximity sensor with high repeatability, preventing off-axis sway during retraction.
Pallet Stopper Gate
Acts as a rigid physical barrier on a packaging line, halting light product flow without deflection.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S the Right Cylinder?
For lower force needs, the 16 mm bore yields 100.5 N push at 0.5 MPa, while the larger 25 mm bore provides 245.4 N if your payload requires more thrust. Choose a plain ACQ if lateral load resistance and anti-rotation are unnecessary, or a double-rod ACQD for higher torsional rigidity. Confirm your 20 mm bore, 5 mm stroke, S magnet, and PT thread. Always verify the mass and speed limits, and ensure applied forces stay concentric with the rod to avoid exceeding the reverse torque limit.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S FAQ
This 20 mm bore cylinder provides 157.1 N push and 117.8 N pull at 0.5 MPa, 219.9 N push at 0.7 MPa, and a maximum push of 32 kgf at 1.0 MPa. The standard stroke is 5 mm, and the non-rotating tolerance is ±0.15°.
Two stainless steel guide rods resist lateral loads, but reverse torque limits decrease with stroke length; treat the allowable torque as an order-of-magnitude guide and confirm the exact value from the datasheet. The S suffix provides a piston magnet compatible with reed or solid-state electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ20X5S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.