Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø25mm bore, 10mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ25 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S
The AirTAC TACQ25X10S is a double-acting JIS compact guided cylinder with a 25mm bore and 10mm stroke. It combines an ACQ body with two stainless steel guide rods and a fixing plate, driving and guiding a load in one unit to replace a separate linear guide. The twin rods ensure non-rotating accuracy to ±0.15° and handle lateral loads that a plain compact rod cannot.
Drive force equals a standard ACQ of the same bore, as the guides add stiffness rather than thrust. This 25mm model features a 12mm rod, M5x0.8 port, and an integrated -S magnet for position sensing. It includes fixed elastomer bumpers for end-of-stroke deceleration. Do not exceed the maximum allowable reverse torque or mass/speed limits charted at 0.5 MPa; confirm exact values from the datasheet.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 189 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S Is Used
Pick-and-Place Head
Maintains precise angular alignment to ±0.15° during vertical component placement on PCB assembly lines.
Camera Slide
Provides stable, wobble-free positioning for machine vision cameras inspecting small electronic modules.
Pallet Stopper
Acts as a rigid, non-rotating gate to halt and hold workpieces on a packaging conveyor line.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S the Right Cylinder?
For 245.4N push force at 0.5MPa, the TACQ25X10S fits medium-duty guiding tasks. If your load is lighter, step down to the 20mm bore (157.1N push); for heavier thrust, step up to the 32mm bore (402.1N push). Choose a plain ACQ if lateral load and anti-rotation are not required, or a double-rod ACQD if you need higher resistance to direct deflection. Confirm your ordering essentials: 25mm bore, 10mm stroke (max standard 50mm), -S magnet, and PT port. Always verify the lateral load and reverse-torque limits for your specific stroke from the datasheet.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S FAQ
The 25mm bore provides 245.4N push and 188.9N pull at 0.5MPa, 343.6N push at 0.7MPa, and a maximum push of 50kgf at 1.0MPa. The max standard stroke is 50mm. Two guide rods ensure non-rotating tolerance to ±0.15°.
The -S magnet works with reed or electronic solid-state switches. Note that a plain ACQ-type does not hold its load on air loss; the rod drifts and the fixed bumper only decelerates near stroke end. For fail-safe holding, use an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.