Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30 is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø25mm bore, 30mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ25 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30
Operating double-acting, the AirTAC TACQ25X30 integrates two stainless guide rods and a fixing plate with a JIS compact body. This architecture yields a non-rotating tolerance of ±0.15° while supporting lateral loads that would bind a plain rod. The guide units contribute stiffness rather than extra drive thrust, so output mirrors a standard ACQ. At 0.5 MPa it provides 245.4 N push and 188.9 N pull force.
The unit features a fixed elastomer bumper to soften end-of-travel impacts rather than an adjustable air cushion. Integrated sensor grooves exist on the body, though this specific configuration ships without a magnet. Engineers must respect the maximum allowable reverse torque and mass/speed limits (charted at 0.5 MPa), which decrease as the stroke extends; always confirm exact values from the datasheet.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30 Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30 |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø25 mm |
| Stroke | 30 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | M5×0.8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 189 N |
| 0.7 MPa | 344 N | — |
| Max (@1.0 MPa) | 50 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30 Is Used
Pick-and-Place Head
Maintains strict ±0.15° orientation during vertical component insertion on PCB assembly lines.
Vision Camera Slide
Provides stable, twist-free positioning for machine vision cameras inspecting flat displays.
Carton Stopper Gate
Resists side-impact loads from passing packages on a packaging conveyor without derailing.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30 the Right Cylinder?
Selecting this 25 mm bore over the smaller 20 mm increases thrust from 157.1 N to 245.4 N push at 0.5 MPa. If your application requires more power, the 32 mm bore yields 402.1 N. A standard ACQ fits if no lateral load or anti-rotation guidance is needed, while a double-rod ACQD suits higher drive force demands. Verify your ordering parameters: 25 mm bore, 30 mm stroke (within the 50 mm maximum), PT port thread, and no magnet. Always check the lateral load and reverse-torque constraints against the datasheet, and apply external load concentrically with the rod.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30 FAQ
This double-acting cylinder delivers 245.4 N push and 188.9 N pull at 0.5 MPa, 343.6 N push at 0.7 MPa, and a maximum push of 50 kgf at 1.0 MPa. The standard stroke limit is 50 mm. Twin guide rods ensure a non-rotating tolerance of ±0.15°.
No, a standard ACQ-type body drifts on air loss because the fixed bumper only decelerates near stroke end; use an external rod lock for fail-safe holding. Also, do not exceed the maximum reverse torque limit (an order-of-magnitude reference that must be confirmed from the datasheet) and keep external force concentric with the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ25X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.