Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø32mm bore, 20mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ32 mm
- Stroke20 mm
- Port sizePT1/8
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S
The AirTAC TACQ32X20S is a double-acting JIS compact guided cylinder featuring a 32mm bore and 20mm stroke. It integrates two stainless steel guide rods and a fixing plate to drive and guide a load simultaneously, eliminating the need for a separate linear guide. The twin-rod mechanism ensures non-rotating accuracy of ±0.15° at the retracted position, supporting lateral loads that a plain compact rod cannot withstand.
Drive force mirrors a standard ACQ bore 32, delivering 402.1N push and 301.6N pull at 0.5MPa, since the guide rods add stiffness rather than thrust. This unit includes a built-in magnet for position sensing and uses fixed NBR elastomer bumpers at stroke ends instead of adjustable air cushions. Operating pressure ranges from 0.15-1.0MPa, with a PT1/8 port and an M8x1.25 female rod-end thread. Always apply external force concentric with the rod to avoid exceeding the allowable reverse torque.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S Is Used
Pick-and-Place Head
Mounts small grippers for electronic component handling, using the twin guide rods to maintain strict ±0.15° non-rotating accuracy during vertical transfers.
PCB Probe Gate
Acts as a stopper gate on a conveyor line, carrying lateral load without side deflection while holding testing fixtures steady.
Small Assembly Press
Drives a 20mm pressing action for bearing insertion, relying on the fixed NBR bumper to absorb end-of-stroke energy without external cushions.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S the Right Cylinder?
Choosing the TACQ32X20S is ideal when your application demands 402.1N of push force at 0.5MPa alongside precise anti-rotation control. If you need less force, the bore 25 model provides 245.4N push, while stepping up to the bore 40 unit yields 628.3N push. A plain ACQ cylinder fits setups lacking lateral loads or needing a shorter footprint, whereas a double-rod ACQD suits higher rigidity demands. When ordering, verify the 20mm stroke is within the 100mm maximum, select the -S magnet for sensors, and confirm PT threading. Always check the mass and speed limits charted at 0.5MPa, and confirm the exact reverse torque limit from the datasheet, as it decreases with stroke length.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S FAQ
The TACQ32X20S provides 402.1N push and 301.6N pull at 0.5MPa, 562.9N push at 0.7MPa, and a maximum push of 82kgf at 1.0MPa. It features a 32mm bore, 20mm stroke (max standard stroke is 100mm), a PT1/8 port, an M8x1.25 rod-end thread, and a non-rotating tolerance of ±0.15°.
The two stainless steel guide rods support lateral loads a plain compact rod cannot, but reverse torque limits decrease with stroke length, so confirm exact values from the datasheet. A plain ACQ-type does not hold its load on air loss; the rod drifts and the fixed bumper only decelerates near the end. For fail-safe holding, use an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ32X20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.