Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30 is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø50mm bore, 30mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ50 mm
- Stroke30 mm
- Port sizePT1/4
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30
The AirTAC TACQ50X30 is a double-acting JIS compact guided cylinder featuring a 50mm bore and 30mm stroke. It integrates two chromed carbon steel guide rods with a fixing plate to drive and support a load simultaneously, effectively replacing a separate linear guide. The twin-rod mechanism ensures non-rotating accuracy of ±0.15° and manages lateral loads that a standard plain rod cannot withstand.
Drive force equals a standard ACQ of the same bore, as the guides add stiffness rather than thrust, delivering 981.8N push and 824.6N pull at 0.5MPa. This unit uses a fixed NBR elastomer bumper for end-of-stroke deceleration rather than an adjustable air cushion. It includes magnetic switch grooves, though this specific configuration ships without a magnet. Note that a plain ACQ-type will not hold its load on air loss; utilize an external rod lock for fail-safe holding.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30 Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30 |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | PT1/4 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30 Is Used
Pick-and-Place Heads
Drives transfer arms in packaging lines, using the dual guide rods to maintain exact ±0.15° positioning during vertical component placement.
Vision System Slides
Advances camera brackets for PCB inspection stations, depending on the lateral-load capability to keep the sensor stable without an external rail.
Pallet Stoppers
Acts as a routing gate on assembly conveyors, relying on the fixed bumper to absorb the 30mm stroke impact safely without adjustable cushions.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30 the Right Cylinder?
For sizing, the smaller 40mm bore yields 628.3N push at 0.5MPa, while the larger 63mm bore provides 1558.6N, ensuring you can step up or down if 981.8N is insufficient or excessive. If your application lacks lateral load or anti-rotation requirements, a standard ACQ saves space; if you need force on both sides, a double-rod ACQD is better. When ordering, verify bore, stroke (30mm is under the 100mm max), and thread (PT1/4 port, M10x1.5 rod-end). Always confirm the reverse torque limit and mass/speed chart from the datasheet, and ensure any external force is applied concentric with the rod.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30 FAQ
The TACQ50X30 delivers 981.8N push and 824.6N pull at 0.5MPa, 1374.4N push at 0.7MPa, and a maximum push of 200kgf at 1.0MPa. It features a PT1/4 port, a 50mm bore, a 30mm stroke (max standard 100mm), and a non-rotating tolerance of ±0.15°.
Two chromed carbon steel guide rods support lateral loads and prevent rotation. You must not apply reverse torque above the limit or external force off-center; always apply force concentric with the rod. The reverse torque limit decreases with stroke, so confirm the exact value from the datasheet. A fixed NBR elastomer bumper absorbs end-of-stroke impact, but for high energy, add an external shock absorber.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ50X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.