Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75 is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø63mm bore, 75mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ63 mm
- Stroke75 mm
- Port sizePT1/4
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75
The AirTAC TACQ63X75 is a double-acting JIS compact guided cylinder featuring a 63mm bore and 75mm stroke. Two chromed carbon steel guide rods and a fixing plate provide rigid anti-rotation control, holding non-rotating accuracy to ±0.15°. This integrated drive-and-guide architecture replaces a separate linear guide, carrying lateral loads that a standard plain rod cannot withstand.
Drive force equals a standard ACQ of the same bore, as the twin rods add stiffness rather than thrust. At 0.5 MPa it yields 1558.6 N push and 1401.5 N pull, rising to 2182 N push at 0.7 MPa, with a 318 kgf maximum at 1.0 MPa. It uses a PT1/4 port, features fixed NBR elastomer bumpers for end-of-stroke deceleration, and operates safely between 30-500 mm/s.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75 Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75 |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | PT1/4 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75 Is Used
Precision Pressing
Applies stable downward clamping force on machining fixtures, where the twin chromed rods prevent platform twisting under offset loads.
Pallet Stopper Gate
Acts as a heavy-duty stopper arm on conveyor lines, absorbing lateral impact while maintaining strict ±0.15° non-rotating accuracy.
Vacuum Lifter Plate
Drives a large pick-and-place suction cup array in packaging lines, handling heavy boxes without side drift during vertical transfer.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75 the Right Cylinder?
Selecting this 63mm bore with a 75mm stroke fits between the smaller 50mm option (981.8 N push @0.5 MPa) and the larger 80mm unit (2513.2 N push @0.5 MPa). Choose a plain ACQ if your load is already guided externally and you need a smaller footprint, or a double-rod ACQD for higher direct thrust. When ordering, verify the 75mm stroke is within the 100mm maximum, specify PT1/4 threads, and confirm your lateral load and reverse torque limits. Reverse torque drops over extended strokes (order-of-magnitude 3.90 N·m down to 1.61 N·m for this bore), so confirm the exact value from the datasheet and ensure external force remains concentric with the rod.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75 FAQ
It provides 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. The two guide rods hold non-rotating accuracy to ±0.15°. The maximum standard stroke for this 63mm bore is 100mm.
No, a standard ACQ-type cylinder drifts when air is lost or valves are centered, as the fixed NBR bumpers only decelerate near stroke ends. For fail-safe load holding, install an external rod lock or pilot-operated check valve. Also, never exceed the maximum allowable reverse torque, which decreases with stroke length—confirm the exact limit from the datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.