Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø63mm bore, 75mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ63 mm
- Stroke75 mm
- Port sizePT1/4
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S
The AirTAC TACQ63X75S is a double-acting JIS compact guided cylinder integrating a standard ACQ body with two chromed carbon steel guide rods and a fixing plate. This configuration drives and guides a load simultaneously, eliminating the need for a separate linear rail while maintaining a non-rotating tolerance of ±0.15° at the retracted position. It handles lateral loads that a plain compact rod cannot withstand.
Thrust output equals a standard ACQ of the same bore, as the twin rods add structural stiffness rather than drive force. At 0.5 MPa it delivers 1558.6 N of push force and 1401.5 N of pull force, peaking at 318 kgf maximum push at 1.0 MPa. The unit features a fixed NBR elastomer bumper for end-of-stroke deceleration and includes a piston magnet (-S) for position sensing.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | PT1/4 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S Is Used
Pick-and-Place Head
Drives a heavy pneumatic gripper assembly on an automated CNC lathe loader, ensuring the part remains perfectly aligned during transfer without twisting.
Multi-Slide Positioning
Indexes a machining fixture across multiple drilling stations on a transfer line, relying on the dual guide rods to prevent platform rotation under offset tooling weight.
Vertical Press Stopper
Acts as a heavy-duty stop gate on a sheet metal stamping conveyor, holding firmly against lateral product force while waiting for the press cycle to complete.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S the Right Cylinder?
When sizing this 63 mm bore unit, consider the neighboring standard bores: the 50 mm yields 981.8 N push, and the 80 mm provides 2513.2 N push at 0.5 MPa. If your application involves extreme off-center loads requiring massive rigidity, the 80 mm might be safer; if the load is lighter, a plain ACQ or a double-rod ACQD could reduce cost and space. Confirm your ordering essentials (63 mm bore, 75 mm stroke under the 100 mm max, S magnet, PT1/4 port). Always verify lateral load and reverse torque limits against the 0.5 MPa charts, and ensure external forces remain concentric with the rod to avoid guide damage.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S FAQ
This double-acting cylinder delivers 1558.6 N push and 1401.5 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a maximum push of 318 kgf at 1.0 MPa. It features a PT1/4 port, an M10x1.5 rod-end thread, a 20 mm rod, and a non-rotating tolerance of ±0.15°. The standard stroke limit for this bore is 100 mm.
The maximum allowable reverse torque decreases as stroke length increases; for a 63 mm bore, it is roughly 3.90 N·m at 10 mm down to about 1.61 N·m at 100 mm. Treat this as an order-of-magnitude guide and confirm the exact value from the datasheet. The included -S magnet allows position detection using either reed or solid-state electronic switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ63X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.