Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75
The AirTAC Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75 is a genuine double-acting GUIDED compact (JIS) cylinder — a Ø80mm bore, 75mm stroke and two guide rods with a fixing plate. The twin guides hold the platform non-rotating to within ±0.15° and carry lateral load a plain compact rod cannot, so it drives and guides a load in one unit.
- BoreØ80 mm
- Stroke75 mm
- Port sizePT3/8
- Acting typeDouble acting, guided
- Non-rotating±0.15°
- CushionBumper (both ends)
About the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75
The TACQ80X75 is a double-acting JIS compact guided cylinder featuring an 80mm bore and a 75mm stroke. It integrates two chromed carbon steel guide rods with a fixing plate to drive and guide a load simultaneously, eliminating the need for a separate linear rail. The twin-rod mechanism ensures non-rotating accuracy of ±0.15° and supports lateral loads that a standard plain rod cannot withstand.
Drive force equals that of a standard ACQ body, as the guides add structural stiffness rather than thrust. At 0.5 MPa, it provides 2513.2N of push force and 2267.8N of pull force. The unit incorporates fixed NBR elastomer bumpers at each end for end-of-stroke deceleration and includes magnetic switch grooves, though this specific configuration ships without a magnet. Operating pressure ranges from 0.15-1.0 MPa, and the PT3/8 port ensures robust pneumatic flow for this high-capacity actuator.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75 Technical Specifications
| Model | Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75 |
|---|---|
| Series | TACQ JIS guided compact cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting, guided (non-rotating) |
| Non-rotating tolerance | ±0.15° |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC TACQ datasheet. Two guide rods carry lateral load and hold rotation to ±0.15°; do not apply reverse torque beyond the datasheet limit. Confirm against the product label before installation.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Drive force equals a standard ACQ of the same bore — the guide rods add stiffness, not thrust. Keep moving mass and speed within the datasheet chart (rated at 0.5 MPa).
Model Code: Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75
| TACQ | JIS compact cylinder WITH guider (non-rotating). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| thread | Blank = PT; G or NPT available. |
The guide plate replaces a separate rod-thread option. Related: ACQ (plain single rod), ACQD (double rod), ACQJ (adjustable stroke).
Where the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75 Is Used
Pick-and-Place Head
Ideal for large component transfer in automated assembly lines where the ±0.15° non-rotating tolerance prevents workpiece yaw during rapid vertical placement.
Heavy-Duty Stopper Gate
Serves as a robust machine guard on conveyor systems, using the twin guide rods to absorb heavy lateral impact forces from passing pallets.
Small Press Ram
Provides steady 2513.2N pressing force for stamping or seating operations in packaging machinery, guided by the chromed steel rods to prevent ram deflection.
Is the Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75 the Right Cylinder?
When sizing this 80mm bore actuator, consider the adjacent options: the 63mm bore yields 1558.6N push at 0.5 MPa, while the 100mm bore offers 3927.0N push. If your application does not require anti-rotation or lateral load support, a plain ACQ80 cylinder provides equivalent thrust in a lighter footprint. For higher torque resistance or symmetrical pushing, a double-rod ACQD series might be preferable. Confirm your ordering essentials (80mm bore, 75mm stroke under the 100mm max, PT thread) and verify your load against the reverse-torque and mass/speed limits charted at 0.5 MPa. Ensure external forces remain concentric with the rod to prevent guide binding.
Quick checklist
- ✓ Lateral load / non-rotation needed?
- ✓ Moving mass and speed within chart
- ✓ Drive force at your pressure
- ✓ Magnet (S) for sensors?
- ✓ No reverse torque on the guide rods
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Do not apply reverse torque above the datasheet limit.
- check Apply external force concentric with the rod.
- check Keep mass × speed within the performance chart.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75 FAQ
This 80mm bore guided cylinder has a 75mm stroke (maximum standard stroke is 100mm). It generates 2513.2N push and 2267.8N pull at 0.5 MPa, 3518.5N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The non-rotating tolerance is ±0.15°.
Two chromed carbon steel guide rods carry lateral loads, but there is a maximum allowable reverse torque that decreases with stroke length (order-of-magnitude ~5.77 to ~11.85 N·m for this bore) — confirm the exact value from the datasheet. It uses fixed NBR elastomer bumpers, not adjustable air cushions. It does not hold its load on air loss; use an external rod lock for fail-safe holding, and avoid applying reverse torque above the limit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC TACQ Guided Cylinders
Request a Quote for Airtac TACQ Guided Rod Ultra-Thin Cylinder TACQ80X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.