Airtac TCLJ Three-Axis Adjustable Cylinder TCLJ25X200-50S
2. Dual guide rods manufactured from specialized bearing steel, guided by either linear bearings (ball-type) or bronze bushings, delivering exceptional torsion resistance and lateral load capacity. ★Note: Ball-type linear bearings: Ideal for lifting applications requiring high precision, superior load capacity, and low-friction movement. Bronze sliding bushings: Optimized for braking operations with radial loads, offering 2X greater lateral impact resistance and enhanced torsional rigidity compared to conventional brake cylinders.
3. Integrated design combines driving unit and guiding mechanism within a single body, eliminating additional accessories while maintaining minimal spatial requirements. Optional air inlet ports enable flexible installation.
4. Precision-engineered positioning holes on base surface, rear end face, and mounting plate (PA holes and XX holes in outline diagram) ensure accurate alignment for high-precision applications.
5. Four sensor grooves on body accommodate multiple sensor mounting configurations.
6. Proprietary structural design supports versatile mounting configurations across multiple orientations.
Category: Adjustable Cylinder | Brand: AIRTAC | Series: TCLJ
AirTAC TCLJ25X200-50S 3-Axis Adjustable Cylinder Specifications
- Model: TCLJ25X200-50S
- Type: 3-axis adjustable pneumatic cylinder (ISO 6432 compliant)
- Bore size: 25mm
- Stroke: 200mm
- Adjustment range: ±2.5mm per axis (total 5mm compensation)
- Operating pressure: 0.05–1.0 MPa
- Temperature range: -10℃ to 80℃
- Port size: M5x0.8 (standard) / G1/8 optional
- Mounting type: Front flange with 4xM5 threaded holes
- Cushioning: Adjustable pneumatic cushion at both ends
- Seal material: Heat-resistant NBR (Nitrile rubber)
- Piston rod material: Chrome-plated carbon steel
- Weight: 1.8kg (without accessories)
- Dimensions:
- Length: 348mm (full extension)
- Width: 50mm (mounting flange face)
- Height: 50mm (body diameter)
- Lubrication: Pre-lubricated (Daphne Grease AL-2)
- Protection class: IP54 (standard sealing)
High-precision 3-axis compensation cylinder designed for misalignment correction in automated systems. Features triple-axis adjustability (X/Y/Z) through precision ground threads and lock nuts, enabling ±2.5mm positional compensation. The anodized aluminum body ensures corrosion resistance, while the double-sealed piston design maintains consistent performance in high-cycle applications (up to 5 million cycles at 0.5MPa). Requires 40μm filtered air with 1-50cSt viscosity oil mist lubrication for optimal performance.
- Precision alignment in robotic end-effector tooling
- Position compensation for conveyor transfer systems
- Die cushion adjustment in stamping presses
- 3D sensor mounting platforms
- Optical equipment positioning stages
- Automated screw fastening systems
Installation guidelines:
Adjust axis compensation after mounting using 4mm hex key.
Maintain 0.5-1mm gap between rod end and load during alignment.
Perform initial lubrication check every 50km of cumulative stroke.
| Property | Property Value |
|---|---|
| sku | TCLJ25X200-50S |
| Adjustable Stroke | <50mm> |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20°C to 70°C Speed Range: 30 to 500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Cushion Type | Bumper Pad |
| Bore Diameter | <25 mm> |
| Stroke | <200mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.