Airtac TCM Triple Axis Cylinder TCM32X250-S-H
$235.44
Regular price
$242.94
Sale!
Unit price
per
sold in last hours
customers are viewing this product
Couldn't load pickup availability
SKU:
In stock
SKU:
TCM32X250-S-H
Product type:
DELIVERY
Estimated delivery between
and
Guarantee Safe Checkout
Description
1. Complies with JIS standards;
2. Features two guide rods manufactured from specialized bearing steel, guided by linear ball bearings or bronze sliding bearings, delivering exceptional torsion resistance and lateral load capacity. ★Note: Linear ball bearings: Ideal for thrust applications requiring high precision, heavy payloads, and low-friction motion. Bronze sliding bearings: Optimized for radial load applications like braking systems, offering 2X greater lateral impact resistance and enhanced torsional rigidity compared to standard brake cylinders;
3. Integrated design combines driving unit and guidance mechanism within a single body, eliminating need for auxiliary components. Features minimal spatial footprint with configurable intake ports for flexible installation;
4. Precision positioning holes on base surface (2x), rear face (2x), and mounting plate (2x at PA/XX locations) ensure accurate alignment. Enhanced precision variants available for critical positioning requirements;
5. Four strategically engineered magnetic sensor grooves on body enable multiple switch mounting configurations;
6. Modular body architecture supports multi-orientation mounting solutions;
Category: Three-axis guided cylinders | Brand: AirTAC | Series: TCM
Mounting Guidelines:
For vertical installations exceeding 45° tilt, install an air pressure holding valve.
Alignment tolerance between guide rods and load must be ≤0.1mm/m. Lubricate guide rods
every 500km of travel using specified grease.
2. Features two guide rods manufactured from specialized bearing steel, guided by linear ball bearings or bronze sliding bearings, delivering exceptional torsion resistance and lateral load capacity. ★Note: Linear ball bearings: Ideal for thrust applications requiring high precision, heavy payloads, and low-friction motion. Bronze sliding bearings: Optimized for radial load applications like braking systems, offering 2X greater lateral impact resistance and enhanced torsional rigidity compared to standard brake cylinders;
3. Integrated design combines driving unit and guidance mechanism within a single body, eliminating need for auxiliary components. Features minimal spatial footprint with configurable intake ports for flexible installation;
4. Precision positioning holes on base surface (2x), rear face (2x), and mounting plate (2x at PA/XX locations) ensure accurate alignment. Enhanced precision variants available for critical positioning requirements;
5. Four strategically engineered magnetic sensor grooves on body enable multiple switch mounting configurations;
6. Modular body architecture supports multi-orientation mounting solutions;
Category: Three-axis guided cylinders | Brand: AirTAC | Series: TCM
AirTAC TCM32X250-S-H Triaxial Cylinder Technical Details
- Model Code: TCM32X250-S-H
- Series: TCM Heavy-Duty Triaxial Actuator
- Bore Size: Ø32mm (ISO 6432 standard)
- Stroke: 250mm (±0.5mm tolerance)
- Operating Pressure: 0.05-1.0 MPa
- Cushioning: Adjustable hydraulic shock absorber (both ends)
- Temperature Range: -20℃ to 80℃ (NBR seals)/120℃(option with FKM)
- Port Size: G1/8 (BSPP thread)
- Guide Rod Diameter: Ø12mm chromium-plated steel
- Repeat Positioning Accuracy: ±0.05mm
- Material: Aluminum alloy barrel (hard anodized), steel end caps
- Seal Type: NBR standard/FKM optional
- Weight: 5.2kg (with mounting brackets)
- Dimensions: 400mm(L) × 105mm(W) × 105mm(H)
- IP Rating: IP54 (standard)/IP67 (with wiper seal option)
- Lubrication: Pre-lubed (Grease Molykote 33M)
High-precision triaxial linear actuator combining pneumatic thrust with mechanical guidance, featuring dual hardened steel guide rods for exceptional moment load resistance. The T-shaped base allows multi-surface mounting. Integrated magnet slots support inductive sensors (SM/SMF series) for position feedback. Requires 40μm filtered air with 1-10% lubricating oil (ISO VG32 recommended).
Industrial Applications:
- PCB board handling robots (Z-axis press-fit mechanisms)
- Automated optical inspection (AOI) equipment positioning
- Semiconductor wafer transfer systems
- Precision die-casting part extraction
- Automotive welding fixture alignment
Mounting Guidelines:
For vertical installations exceeding 45° tilt, install an air pressure holding valve.
Alignment tolerance between guide rods and load must be ≤0.1mm/m. Lubricate guide rods
every 500km of travel using specified grease.
| Property | Property Value |
|---|---|
| sku | TCM32X250-S-H |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20°C to 70°C Speed Range: 30 to 500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Cushion Type | Bumper Pad |
| Bore Diameter | <32 mm> |
| Stroke | <250MM> → <250mm> |
| Bearing Code | Bronze Bushing |
Shipping policies
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.
Reviews
Recently Viewed
Explore your recently viewed items, blending quality and style for a refined living experience.