Airtac TN Double Axis Double Rod Cylinder TN10X75S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X75S is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
About the Airtac TN Double Axis Double Rod Cylinder TN10X75S
The TN10X75S is a double-acting twin-rod cylinder whose two parallel rods on one shared plate prevent the plate from rotating under load while resisting bending and twisting, so the load mounts straight onto the plate. The 10 mm bore and 75 mm stroke give a theoretical push thrust of about 39.3 N at 0.5 MPa (the pull side is lower), suited to light pushing, clamping and positioning tasks. An external front bumper cushions end-of-stroke impact and adjusts the stroke over -5 to 0 mm.
This is a genuine AirTAC part built to the TN enterprise standard (bores 10/16/20/25/32 mm, PT threads only), with a magnet fitted as standard on every cylinder and magnetic-switch slots around the body. It runs on air filtered to 40 um at 0.2-1.0 MPa and -20 to 70 C. Because overall dimensions vary with stroke, contact us and we will confirm dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X75S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X75S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the bore for thrust: the 10 mm bore here delivers about 39.3 N push at 0.5 MPa, so choose 16/20/25/32 mm for heavier duties. TN is the enterprise-standard series with PT thread only; TR is the JIS-series twin-rod with PT, G or NPT threads and a precise guide grade - higher non-rotating accuracy, low rod-end deflection, and a lengthening sliding-support guide that needs no added lubrication. Strokes come from the bore's stroke table; keep within it and avoid over-long strokes that outgrow the short-cover design. Route allowable side-load checks (published as curves) and dimensions to us or the datasheet.
Applications
Pallet-cart gate actuator
Swings or lifts a light gate on a cart or mini-conveyor line; the twin-rod plate moves without rotating so the gate tracks cleanly over the 75 mm stroke.
Indexing stopper on an assembly bench
Extends to stop a fixture or part carrier at the right station, with the non-rotating plate keeping the stop face square and the bumper softening each halt.
Small-parts ejector at a press station
Uses the 10 mm bore's light push thrust to eject finished small parts from a nest, with the adjustable bumper giving a repeatable end position each cycle.
FAQ
Why choose a twin-rod cylinder like the TN10X75S over a single-rod cylinder?
Two parallel rods on one shared plate give the plate resistance to bending and twisting, so the load mounts directly on it without rotating and stays square through the 75 mm stroke. Note that thrust figures here apply to this twin-rod model; a single-rod cylinder's force is a different specification.
What pressure and air quality does the TN10X75S need?
This 10 mm bore operates at 0.2-1.0 MPa (29-145 psi) on air filtered to 40 um, with a working temperature of -20 to 70 C and speeds of 30-500 mm/s. Proof pressure is 1.5 MPa (215 psi). Keep to the short-cover design when picking strokes, and confirm dimensions from the datasheet.