Airtac 2KL Solenoid Valve 2KL03008AI
2. Piston pilot normally open 2-way, 2-position solenoid valve with fast response and high flow capacity;
3. Wide pressure range adaptability, offering High Pressure (H) type and Standard type variants;
4. Compact structure with small footprint, lightweight design, and tool-free maintenance;
5. SUS304 stainless steel body construction, H-class heat-resistant coil, and PTFE (Teflon®) seals ensuring compatibility with multiple media, especially optimized for high-temperature water and saturated steam applications;
6. IP65-rated coil protection, available with direct lead wire or DIN connector electrical interfaces.
Category: Fluid Solenoid Valves | Brand: Airtac | Series: 2KL
AirTAC 2KL03008AI Solenoid Valve Technical Details
- Model: 2KL03008AI
- Type: 5/2-way single solenoid (monostable)
- Port size: PT1/4 (G1/4 optional)
- Operating pressure range: 0.15–0.8 MPa (21.7–116 PSI)
- Voltage variants: DC24V (±10%), AC220V 50/60Hz
- Weight: 620g ±5% (without connectors)
- Dimensions: 80mm(L) × 55mm(W) × 65mm(H)
- Seal material: Heat-resistant NBR (Nitrile Butadiene Rubber)
- Temperature tolerance: -5℃ to 60℃ (no freezing)
- Power consumption: ≤5W (AC), ≤4.8W (DC)
- Response time: ≤30ms (exhaust to operation)
- Flow capacity: 1000 NL/min (ANR, at 0.5 MPa)
- Port thread depth: 12mm (minimum engagement)
- Protection class: IP65 (dust-tight & water jet resistant)
- Manual override: Optional paddle-type (side-mounted)
- Coil insulation class: Class F (155℃)
High-flow directional control valve with low power coil design, featuring aluminum alloy body with hard anodized finish for chemical resistance. The zero-pressure differential start capability enables reliable operation in vacuum applications. Equipped with LED status indicator and surge protection circuitry. Requires 5μm filtration (40μm for emergency use).
- Pneumatic cylinder sequencing in assembly lines
- Textile machinery air circuit control
- Plastic injection molding machine clamp systems
- Automated material handling equipment
- Semiconductor wafer transfer mechanisms
- Bottle capping machine actuators
Installation guidelines:
Mount with M5 screws (recommended torque 2.0N·m). Maintain minimum
50mm clearance above valve for manual override operation. Use
PTFE tape on male threads only. For horizontal mounting, install
exhaust silencers vertically downward to prevent condensate ingress.
Critical notes:
Not compatible with phosphate ester fluids. Lubricate with ISO VG32
turbine oil if using non-lubricated air. Cycle rate limited to
60% ED at maximum temperature. Allow 3-minute cooldown after
continuous 2-hour operation.
| Property | Property Value |
|---|---|
| sku | 2KL03008AI |
| Port Size | PT1/4 |
| Flow Aperture | <3mm> |
| Coil Voltage | AC220V |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.