Airtac B04-SAI Construction Machinery Special ISO Standard Cylinder B04-SAI100X100
AirTAC B04-SAI100X100 Construction Machinery ISO Cylinder Specifications
- Model: B04-SAI100X100
- Standard: ISO 15552 (VDI 3852 compliant)
- Bore size: 100mm
- Stroke: 100mm (Customizable 25-2000mm)
- Operating pressure: 0.1-0.9 MPa
- Cushioning: Adjustable pneumatic cushion (both ends)
- Mounting type: Foot-mounted (ISO 15552 MF1)
- Port size: G1/2 (ISO 1179)
- Temperature range: -20℃ to 80℃
- Material:
- Cylinder tube: Hard anodized aluminum alloy
- Piston rod: Chrome-plated stainless steel (SUS304)
- Seals: NBR + Polyurethane (standard), optional FKM
- Weight: 12.5kg (bare cylinder)
- Dimensions:
- Total length: 450mm (at mid-stroke)
- Mounting base: 250mm × 130mm
- Rod end thread: M20×1.5
- Protection rating: IP65 (standard), IP67 optional
- Lubrication: Pre-lubricated (DIN 51506 VDL oil)
Heavy-duty ISO cylinder specifically engineered for construction equipment, featuring reinforced rod bearings and anti-corrosion plating. The dual-seal design incorporates a primary polyurethane seal for high-speed operation and secondary NBR seal for contamination resistance. Requires 5μm filtered air with 1-5mg/m³ oil mist content.
- Excavator bucket control mechanisms
- Concrete pump truck boom actuators
- Industrial stamping machine power units
- Material handling clamp positioning
- Agricultural equipment lift systems
Installation note:
Maintain 0.05mm/m alignment tolerance during mounting. For vertical installations,
use rod-end support brackets (AS-1012 accessory recommended). Lubricator units
should maintain 32-46 cSt viscosity oil supply.
| Property | Property Value |
|---|---|
| sku | B04-SAI100X100 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.