Airtac B04-SAI Construction Machinery Special ISO Standard Cylinder B04-SAI100X1126S
AirTAC B04-SAI100X1126S Construction Machinery Specific ISO Cylinder
- Model Code: B04-SAI100X1126S
- Standard: ISO 15552 (VDMA 24562)
- Bore Size: 100mm (3.94")
- Stroke: 1126mm (44.33")
- Operating Pressure: 0.15–1.0 MPa (21.7–145 PSI)
- Cushioning Type: Adjustable air cushion (both ends)
- Mounting Style: Front/rear flange (ISO 15552 pattern) with optional foot bracket
- Port Size: G1/2 (ISO 228/1 standard)
- Temperature Range: -20℃ to 80℃ (-4°F to 176°F)
- Rod Material: Hard chrome-plated steel (H5 tolerance)
- Tube Material: Anodized aluminum alloy
- Seals: NBR standard (optionally available in FKM for high temp)
- Weight: 9.8kg (21.6 lbs) ±3%
- Dimensions (L×W×H):
- Retracted Length: 575mm (22.64")
- Extended Length: 1701mm (66.97")
- Mounting Flange Width: 125mm (4.92")
- Rod End Thread: M20×1.5
Heavy-duty pneumatic cylinder engineered for construction equipment durability, featuring reinforced rod guides and impact-resistant cushioning. The dual sealing system combines a primary U-cup with secondary wiper seal for dust/dirt exclusion. Requires ISO VG32 hydraulic oil lubrication when used in high-cycle applications (>500,000 cycles/year).
- Excavator bucket positioning mechanisms
- Concrete pump truck boom articulation
- Crane outrigger stabilization systems
- Pile driver impact hammer controls
- Earth compactor vibration dampers
Installation Guidelines:
Always install with rod orientation downward in vertical applications. Use alignment couplers when stroke exceeds 800mm.
Requires monthly lubrication checks in high particulate environments. Avoid side loads exceeding 150N.
| Property | Property Value |
|---|---|
| sku | B04-SAI100X1126S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.