Airtac B04-SAI Construction Machinery Special ISO Standard Cylinder B04-SAI100X125S
AirTAC B04-SAI100X125S Construction Machinery ISO Cylinder Specifications
- Model Series: B04-SAI (Heavy-Duty ISO 15552 Equivalent)
- Bore Size: 100mm
- Stroke: 125mm (±0.5mm tolerance)
- Operating Pressure: 0.1-0.9 MPa (1-9 bar)
- Cushioning: Adjustable pneumatic cushion (both ends)
- Material: Aluminum alloy barrel, CR12MoV chrome-plated piston rod
- Seal Type: Nitrile rubber (NBR) with wear-resistant ring
- Mounting: ISO 15552 standard mounting patterns (Basic, MF1/MF2 flange, MP4/MP5 trunnion options)
- Port Size: G1/4 (ISO 1179-1 standard)
- Temperature Range: -20℃ to 80℃ (dry air required below 0℃)
- Protection Class: IP65 (wipers included for dust prevention)
- Weight: 4.8kg (excluding accessories)
- Dimensions:
- Total Length: 345mm (stroke-dependent)
- Barrel Diameter: 100mm (nominal)
- Mounting Face Width: 48mm
- Overall Height: 150mm (with standard mounting)
- Optional Features: Magnetic piston for position sensing (SI/SQ sensor compatible)
Heavy-wall cylinder designed for construction equipment vibration resistance, featuring dual chrome-plated piston rods for enhanced corrosion protection. The extended bearing design reduces side load wear, with hardened aluminum end caps surviving 10,000+ impact cycles. Requires ISO 8573-1:2010 Class 3-4-3 compressed air quality.
- Excavator bucket positioning mechanisms
- Concrete pump truck boom articulation
- Pile driver hammer control systems
- Crane outrigger synchronization
- Rock drilling equipment feed force control
Installation Protocol:
Use anti-vibration mounting brackets (torque 58-62 N·m). Lubricate with ISO VG32 hydraulic oil
if operating below 0.15 MPa. Install downstream 5μm filter with automatic drain.
| Property | Property Value |
|---|---|
| sku | B04-SAI100X125S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.