Airtac B04-SAU Standard Air Cylinder for Construction Machinery B04-SAU32X50
AirTAC B04-SAU32X50 Construction Machinery Cylinder Specifications
- Model: B04-SAU32X50
- Series: Heavy-Duty Construction Series (SAU)
- Bore size: 32mm
- Stroke: 50mm
- Operating pressure: 0.15–0.8 MPa
- Operating temperature: -20℃ to 80℃
- Cushioning: Rubber buffer (adjustable both ends)
- Mounting type: MF series foot mounting
- Port size: G1/8 (ISO standard)
- Piston rod material: Chrome-plated carbon steel
- Tube material: Aluminum alloy with hard anodizing
- Seal material: NBR (Nitrile rubber)
- Weight: 1.2kg ±3%
- Dimensions: 150mm(L) × 80mm(W) × 100mm(H)
- Rod thread: M12×1.25
- Protection rating: IP65 (dust-proof & water jet resistant)
- Max speed: 500mm/s
- Lubrication: Pre-lubricated (Oil-free operation possible)
Industrial-grade pneumatic cylinder engineered for construction equipment applications. Features reinforced structure with impact-resistant end caps and anti-corrosion surface treatment. The double-acting design incorporates a wear-resistant bearing bushing for precise linear motion under heavy loads. Requires 40μm filtered air with ISO 8573-1 air quality standard.
- Excavator bucket positioning mechanisms
- Concrete pump truck hydraulic assist systems
- Drilling rig feed control
- Crane outrigger stabilization
- Pile driver impact dampening
Installation note:
Mount using grade 8.8 or higher bolts with Loctite adhesive.
Maintain 0.5° maximum angular misalignment during installation.
For vertical mounting, install exhaust mist lubricator downstream.
- Relubricate every 500km of cumulative stroke movement
- Inspect rod seals every 1,000 operating hours
- Replace buffer seals after 2 million cycles
| Property | Property Value |
|---|---|
| sku | B04-SAU32X50 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.