Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI50X200S
AirTAC B06-SAI50X200S ISO Standard Battery-Specific Cylinder
- Model: B06-SAI50X200S
- Type: ISO 15552 compliant single-acting spring return
- Bore size: 50mm
- Stroke: 200mm (±1mm tolerance)
- Operating pressure: 0.05–1.0 MPa
- Cushioning: Adjustable pneumatic cushioning (both ends)
- Port size: G3/8 (ISO 1179 standard)
- Position detection: Pre-drilled mounting slots for magnetic sensors
- Rod material: Stainless steel (SUS304) with hard chrome plating
- Cylinder tube: Anodized aluminum alloy (AL6063-T5)
- Seal material: Heat-resistant NBR (Nitrile Butadiene Rubber)
- Temperature range: -20℃ to 80℃ (continuous operation)
- Protection rating: IP67 (dust-tight & protected against temporary immersion)
- Weight: 2.85 kg (±3%)
- Dimensions:
- Extended length: 376mm
- Retracted length: 176mm
- Body width: 68mm (including mounting brackets)
- Height: 64mm (from base to rod centerline)
Specialized corrosion-resistant cylinder engineered for battery manufacturing environments, featuring enhanced sealing against acidic vapors and electrolyte exposure. The double-lip rod seal design minimizes internal leakage (<0.5 mL/min @ 0.5MPa). Includes anti-rotation mechanism for precise linear motion control.
- Lithium-ion battery cell stacking machines
- Electrolyte filling station actuators
- Battery module compression systems
- EV battery pack assembly lines
- Automated battery testing equipment
Installation note:
Requires copper-free grease (Molykote EM-30L recommended) for lubrication.
Maintain 0.3-0.5mm clearance between magnetic sensor and cylinder body.
Avoid lateral loads exceeding 50N during operation.
| Property | Property Value |
|---|---|
| sku | B06-SAI50X200S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.