Airtac B06-SAU Battery Dedicated Standard Cylinder Series B06-SAU40X400
AirTAC B06-SAU Battery-Optimized Standard Cylinder B06-SAU40X400
- Model Code: B06-SAU40X400
- Bore Size: 40mm (1-9/16")
- Stroke: 400mm (15.75")
- Operating Pressure: 0.05–1.0 MPa (7–145 PSI)
- Cushioning: Adjustable pneumatic cushion (both ends)
- Port Size: Rc1/4 (NPT1/4 optional)
- Piston Speed: 50–700 mm/s (optimal at 200 mm/s)
- Ambient Temperature: -20℃ to 80℃ (-4°F to 176°F)
- Mounting Style: Standard ISO 15552 front flange (MF1) with rear foot mounts
- Material:
- Tube: Hard anodized aluminum alloy
- Piston Rod: Chrome-plated stainless steel (SUS304)
- Seals: Heat-resistant NBR (Nitrile) with wear-resistant ring
- Weight: 3.2 kg (7.05 lbs) ±5%
- Dimensions:
- Total Length: 584mm (23") (stroke + end caps)
- Body Diameter: 63mm (2.48")
- Mounting Hole Spacing: 64mm × 64mm (2.52" × 2.52")
- Rod Thread: M16 × 1.5
- Accessory Compatibility: Built-in magnet for proximity sensor (SM/SD series)
- Lubrication: Pre-lubricated (oil-free operation possible)
- Protection Rating: IP65 (standard), IP67 (optional)
Industrial-grade pneumatic cylinder specifically engineered for battery-powered automation systems. Features low-friction seals and optimized air consumption (15% less than standard models), making it ideal for energy-sensitive applications. The dual-piston design ensures consistent force output across full stroke. Includes corrosion-resistant coatings for humid environments.
- Lithium battery module assembly presses
- EV battery pack handling robots
- Portable energy storage system actuators
- Solar panel cleaning mechanisms
- Battery recycling equipment
Installation Protocol:
Use anti-vibration washers when mounting to battery-powered mobile units.
Maintain 0.5–1.0mm clearance between rod end and load during alignment.
Requires 5μm filtration with dew point -20℃ below ambient temperature.
| Property | Property Value |
|---|---|
| sku | B06-SAU40X400 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.