Airtac B06-SAU Battery Dedicated Standard Cylinder Series B06-SAU80X75
AirTAC B06-SAU80X75 Battery-Optimized Standard Cylinder Specifications
- Model: B06-SAU80X75
- Series: B06-SAU (Battery Application Series)
- Bore size: Ø80mm
- Stroke: 75mm
- Operating pressure: 0.1–0.9 MPa
- Cushion type: Adjustable rubber buffer
- Action mode: Double acting
- Material: Aluminum alloy barrel with hard anodized finish
- Rod material: Chrome-plated steel (S45C)
- Seal material: NBR + Polyurethane hybrid seals
- Temperature range: -20℃ to 80℃
- Weight: 3.45 kg (dry, without mounting accessories)
- Dimensions: 284mm(L) × 96mm(W) × 96mm(H) (at full extension)
- Mounting options: Basic front/rear flange, fixed or swivel
- Rod end type: External thread M20×1.5
- Protection rating: IP54 (standard), IP67 optional
- Lubrication: Pre-lubricated (maintenance-free for 2,000km stroke)
Heavy-duty pneumatic cylinder specifically engineered for battery production environments, featuring enhanced corrosion resistance against acid/alkali atmospheres. The low-friction design achieves ≤0.15 dynamic friction coefficient, ensuring smooth operation in low-pressure battery-powered systems. Integrated wear sensors (optional) enable predictive maintenance.
- Lithium battery cell stacking mechanisms
- Battery module compression fixtures
- Automated electrode plate handling
- EV battery pack assembly lines
- Energy storage system maintenance platforms
Installation note:
For vertical mounting, use auxiliary rod support when stroke exceeds 50mm.
Maintain 0.3-0.5mm alignment tolerance during guide rail pairing.
Initial 50-cycle dry run recommended for seal seating.
| Property | Property Value |
|---|---|
| sku | B06-SAU80X75 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.