Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X160
AirTAC B06-SI100X160 Battery-Specific ISO Standard Cylinder Specifications
- Model: B06-SI100X160
- Type: ISO 6432 compliant, double-acting pneumatic cylinder
- Bore size: 100mm (standard metric series)
- Stroke: 160mm (±1.5mm tolerance)
- Operating pressure: 0.05–1.0 MPa
- Cushioning: Adjustable elastic cushion (both ends)
- Operating temperature: -20℃ to 80℃
- Piston speed: 50–750 mm/s
- Seal material: High-grade NBR rubber with lithium-based grease
- Rod material: Hard chrome-plated steel (HRC 45-50)
- Tube material: Anodized aluminum alloy
- Mounting type: Basic series (ISO 15552 foot mounting standard)
- Weight: 3.8kg (±5%)
- Dimensions (L×W×H): 280mm × 100mm × 100mm (total extended length)
- Port thread: G3/8 (alternative NPT1/4 available)
- Protection rating: IP67 (dust-tight & protected against temporary immersion)
Specialized cylinder optimized for battery manufacturing environments with enhanced corrosion resistance. Features anti-sparking design for explosive atmospheres (ATEX compatible) and low-friction seals for energy-efficient operation. Includes magnetic piston for position sensing compatibility.
- Lithium battery cell compression systems
- Battery module assembly line clamping
- EV battery pack handling robots
- Energy storage system safety lock mechanisms
- Battery formation equipment positioning
Installation note:
Use copper-free grease for lubrication. Maintain 0.5mm minimum alignment tolerance during mounting.
For vertical installations, install rod end downward to prevent particulate accumulation.
- Re-lubrication interval: Every 2,000km of cumulative stroke or 6 months
- Inspect wiper seal every 500,000 cycles
- Max side load: ≤15% of maximum thrust capacity
| Property | Property Value |
|---|---|
| sku | B06-SI100X160 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.