Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X400S
AirTAC B06-SI100X400S Battery-Optimized ISO Cylinder Specifications
- Full model: B06-SI100X400S
- Series: B06-SI (Battery System Special)
- Standard: ISO 6432 compliant
- Bore size: 100mm
- Stroke: 400mm (±1.5mm tolerance)
- Operating pressure: 0.05-0.8 MPa
- Temperature range: -20℃ to 80℃
- Cushioning: Adjustable pneumatic cushion
- Port size: G3/8 (ISO standard tapered thread)
- Mounting type: Basic (no pre-mount accessories)
- Body material: Anodized aluminum alloy (AL6063-T5)
- Rod material: Hard chrome-plated carbon steel (S45C)
- Seal material: Nitrile-butadiene rubber (NBR) + polyurethane hybrid
- IP rating: IP54 (standard), IP67 optional
- Weight: 5.8kg (without accessories)
- Dimensions:
- Extended length: 694mm
- Retracted length: 294mm
- Body diameter: Φ118mm
- Rod end thread: M20×1.5
Optimized for battery-powered systems with ultra-low friction design (≤0.08 dynamic friction coefficient). Features precision honed tube with mirror finish (Ra≤0.2μm) and anti-rotation piston rod. Integrated pressure relief groove prevents seal extrusion. Compatible with AirTAC's SNS/SND series battery controllers.
- AGV material handling arms
- Solar tracker positioning mechanisms
- Mobile hydraulic press systems
- Battery-powered packaging lines
- Off-grid agricultural equipment
Operation tip:
For battery longevity, maintain 0.3-0.5MPa working pressure. Use AirTAC B-Lube 02 grease
for maintenance. Avoid continuous reciprocating cycles exceeding 80% duty cycle.
Critical note:
Requires minimum 15μm filtration. Not compatible with phosphate ester-based lubricants.
Max lateral load: 550N at full extension.
| Property | Property Value |
|---|---|
| sku | B06-SI100X400S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.