Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI100X900S
AirTAC B06-SI Battery Dedicated ISO Standard Cylinder Specifications
- Model: B06-SI100X900S
- Type: ISO 6432 compliant single-acting spring return cylinder
- Bore size: 6mm (0.24") precision honed
- Stroke: 100mm (3.94") ±0.5mm tolerance
- Operating pressure: 0.05-1.0 MPa (7-145 PSI)
- Battery compatibility: 12-24V DC lithium battery systems
- Piston rod diameter: 3mm chromium-plated steel
- Cushioning type: Adjustable rubber buffers (both ends)
- Weight: 340g ±5g (without mounting accessories)
- Dimensions:
- Body length: 158mm (compressed)
- Extended length: 258mm
- Square body width: 20mm × 20mm
- Mounting bracket height: 12mm
- Operating temperature: -20℃ to 80℃ (NBR seals)
- Material: Anodized aluminum body, stainless steel end caps
- Max speed: 500mm/s (with cushioning engaged)
- Lubrication: Pre-lubed for maintenance-free operation (3000km life)
- IP rating: IP54 (standard), IP67 optional
Ultra-compact pneumatic actuator optimized for battery-powered automation systems. Features low friction design (≤0.15 dynamic friction coefficient) and integrated power-saving mode. Includes magnetic piston for position sensing compatibility. Special anti-corrosion treatment for humid environments.
- Portable medical device actuators
- AGV (Automated Guided Vehicle) clamping mechanisms
- Solar-powered agricultural automation
- Lithium battery production line handling
- Robotic gripper systems in cleanrooms
Installation notes:1. Requires 2μm air filtration for optimal seal life
2. Maximum side load: 1.5N at full extension
3. For vertical mounting, use upward port orientation
4. Recommend 5-10% duty cycle margin for battery applications
| Property | Property Value |
|---|---|
| sku | B06-SI100X900S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.